Software
Houzz Logo Print
westtoeast

105' ceiling...WWYD?

14 years ago

Hi all,

So I am one of the conformists.... planning a white shaker kitchen ;-). I will have a stained cherry Island though (different!!) and (90% sure) honed Virgina Jet Mist granite.

Here is one of my inspiration photos (they used soap stone, but the look is similar):

traditional kitchen design by seattle kitchen and bath Warmington & North

My specific question though is this...

I have 105" ceilings. For budgetary reasons, I can't do stacked cabinets. SO what are my options?

I was thinking maybe 42" cabinets, which leaves me with about 9" to the ceiling. What are your thoughts on stacked molding the rest of the way up?

Like this:

or this:



or one of these:

contemporary kitchen design by new york media and blogs Vendome Press

I don't want my kitchen to be too formal, so nothing too fancy...any thought?

Thanks in advance!

Comments (14)

  • 14 years ago

    You are so lucky that you have high ceilings and have options! I'm sure it's just a matter of preference, but personally, I like low-lit above-cabinet-lighting for ambience, and if you put the crown all the way to the ceiling, you couldn't do that. Also keep in mind for those higher wall cabinets, the top shelf will need a ladder to get to unless you are 6 feet tall.

    I've seen photos where the higher top shelves were all see through glass and used for "pretty" display items...it was a very cool design.

  • 14 years ago

    Since you say you prefer to stay with simple lines and not go formal, I'd choose something like the last photo you show. I love that. But maybe choose a crown that doesn't angle out so far, or choose a straighter style of top moulding.

    The top photo looks like it might be simple, too, but it's hard to see for sure.

    Remodelfla and I don't see eye-to-eye on this one. :-) I have 48" uppers and definitely need to stand on something to reach the top shelf, but still think it's valuable storage space. I'm also not into dusting above, so prefer cabinets to the ceiling. We don't have our upper trim yet, so have a 6" gap between cabinets and ceiling. I can't believe how much dust collects up there, and so fast!

  • 14 years ago

    9" of a stacked complex molding like you've pictured will be just as expensive as the stacked cabinets. You also picture a lot of glass in these kitchens. Another BIG expense. You've got budget buster taste, so you need to figure out what feature is going to be most important to you and worth paying a premium for and where and what you feel comfortable cutting. Otherwise you're easily going to end up with a 40K cabinet bill if you stick to all of your inspiration. It might be stacked cabinets. Do solid cabinets below and only use glass above. It might be taller cabinets. Kraftmaid has cabinets taller than most lines standard 42". It might be glass. If you do that, have the cabinets prepped for glass and source it locally. It might be molding. You can have your cabinets color matched at a paint store and buy and install local molding. But you need to prioritize and get a cabinet professional involved now.

  • 14 years ago

    You said you considered but could not afford stacked cabs. Have you considered faux-stacked cabs? We are getting one box, but with two doors and a fixed shelf at the border between them. It is still more expensive, of course, but not as much as true stacked. (We have 101" ceilings.)

  • 14 years ago

    The top kitchen is very vintage-y. Is that what you're going for?

    If so, you can run your cabs to the ceiling, but at the height that the bottom of the cab would normally be, run a continuous open shelf below the cabinet.

  • 14 years ago

    I have exactly the same problem. I looked at stacking, but frankly the 12 inch or 15 inch cabs above a 36 or 30 cab, vs 42 looked awkward. I'm going with molding, much cheaper than the cabinet stacks, similar to your 2nd or 3rd photo.

    Our cabs will be a dark grey green, and our GC will match the paint.

    Good luck. We were happy to have the extra height above the exg Sheetrock ceiling.

  • 14 years ago

    I like the last one best.

    didn't someone on here do fake cabinets above regular ones? it was a board / drywall (?) with doors on it. not usable tho.

  • 14 years ago

    Remember to add on for light rail on the bottom of the cabinets - it takes up another 1.5-2" of height.

    In the first picture, there is a tall, seems like 2 piece crown on the wall and on the "beams" but the cabinets have a plain top with an edge molding. I like the image a lot. To replicate with precision would mean using 36" tall cabinets and building the beams. But even if you do a plain, flat ceiling and ring the room with layered crown - it is a lot cheaper to buy the moldings, install and paint into the room than to buy a multi-board crown from a cabinet shop.

    The second picture is a 4 piece crown and might be kinda spendy. Its cost is exceeded by the third picture showing a crown made up of about 5 pieces. Cabinet shop moldings like that are 40-100 dollars a linear foot plus labor for installation and post installation touch ups. So expect the materials for a 10 x 10 foot room to run around $1,700-$4,400.

    In the last picture, the cabinets have no crown - good for cost saving! The room crown is a two piece crown mounted on a plain board with either half round or a parting bead on the bottom. Its all stuff available at the big box stores and can be painted into the room. The last picture also doesn't have light rail on the bottom of the cabinets.

  • 14 years ago

    You guys rock. All of this info is suer helpful.
    Here are a few things I didn't mention, but should have.
    -I am going with custom cabinets. We priced out 4 semi custom lines (Dynasty Omega, Plain and Fancy, Dover Woods and Ultracraft), as well as three custom cabinet makers. I never would have believed it (until I read it here), but with the exception of the Diver Woods line (which I didn't love) all were more expensive than the custom guys.
    -Our kitchen is attached and totally open to our great room.
    -Our house is a 1944 colonial and while I don't find the need to totally adhere to the style of our house, I don't want to do anything that would clash with the style of our house.

    Marcolo- yes, I do want a bit of a vintage-y look. While I like the look of the continuous shelf, I am afraid of the dust that will collect.

    Green designs- you are right about my budget buster taste, unfortunately. Although I don't have unlimited funds, I am hoping to make SOME version of this work. When we priced out the stacked cabinets, with the glass upper boxes, it was about 3- 4k over what we would like to spend, so maybe like bmorepanic suggested, our carpenter can do the moldings for us, and save us a few pennies.

    Sounds like the last photo would give us the best bang for our buck.

  • 14 years ago

    Remodelzombie- yes, I always felt lucky to have high ceilings...until the cabinet pricing began ;-).

    Rhome- yes, I have 36" uppers now, and hate the dusting. So much in fact, that I rarely do it. Would hate to see what's uo ther at the moment ;-).
    Angie- how tall are your Faux stacks? That's something to think about!

    Felixnot- I wish your kitchen was already done, so I could see it! How tall will your cabinets and moldings be? I agree, unless the ratio of upper boxes to upper cabinets is just right, it looks awkward.
    Desertsteph- I haven't seen that kitchen, I don't think. Glad a few of you like that last one, since from a cost perspective, that may be what we go with.

  • 14 years ago

    If you are going to do a stacked molding, I like the last picture the best, especially if you don't want to formal of a look. Good luck!!! And you're not a conformist...you just have good taste :)

  • 14 years ago

    We have 6" of flat board, then a very simple cove molding, in order to match the rest of the window and door trim in our house. Could you do the same?

  • 14 years ago

    westtoeast: We will have 43" cabinets, and chose to split them 27 lower, 16 upper. (We chose the ratio to be Golden Mean.)

  • 14 years ago

    Oh, I guess I could show you, not a photo, but an elevation drawing to show what this may look like: