Software
Houzz Logo Print
pbrisjar

What to do for drawer fronts?

18 years ago

I need help making another decision...

Hubby is building raised panel doors for our kitchen. I've decided that the tops will be arched but the bottoms will be square. (Yeah, I changed my mind on that for a couple of reasons.) Now what I need to decide is what to do with the drawer fronts. It's a small kitchen with small drawers. Other than one bank of 4, the others are about 5 1/2/ inches high and various lengths (smallest is about 9 1/2 inches wide). The rails and stiles on the doors have to be at least 2 inches wide in order to hold the panels. I had planned on doing "fake" raised panels for the drawer fronts (slabs with the square routed out) to echo the look of the doors. Problem is, with such small drawers, there's no way to have "rails" and "stiles" that match the measurements of the doors. So I either go with plain slabs (really don't like this look) or I "fudge" the measurements on the drawers. Neither one of these are my ideal. Any opinions? Any pics? Any other options I haven't thought about?What do you think about leaving the ones on top of foors plain and making the four in the stack with the raised panel look?

We're only talking about 10 drawers total.

Here is a link that might be useful: pics of my kitchen fo rreference

Comments (13)

  • 18 years ago

    There have been threads discussing this topic. Heres a link to one. Personally, I"d do a slab front on the narrower top drawers and raised look on the lower ones.

    Here is a link that might be useful: door thread

  • 18 years ago

    The rails (crosspieces) on drawer fronts are often about half what the stiles (sides) are...At least ours are. Would that help to make it work?

  • 18 years ago

    for you to peruse pb...

    Here is a link that might be useful: another drawer front thread

  • 18 years ago

    Here is a website that shows the variety of drawer fronts. I happened to click on the raised panel box, but if you go 'back' there are many other styles also. It also might give you some insight on the stiles, etc.

    Good luck in your search. We are finally getting the doors and drawer fronts installed for our reface job.

    Jane

    Here is a link that might be useful: Cabinet drawer fronts

  • 18 years ago

    My cabinet guy made all my drawers raised panel and I am just SO pleased with the result. The top drawers are standard small drawers and the ones below are much larger. He made all the side rails of drawers and doors the same, and the top rails of all drawers a bit narrower so all the drawers would match. You can see in the second picture how the thinner top rail looks with the wider top rail on the door next to it. I honeslty didn't even notice it until I looked at this picture. I LOVE the raised panel drawers!

  • 18 years ago

    I didn't notice the difference ccombs1 until you pointed it out!

    Our original door style (Omega's Artesia, the most expensive door style in the Omega line!) had raised door panels with drawers w/o the raised panels...just the "mitered moulded frame" and "beaded outside profile" and I really like the look. It eliminated the problem w/the raised panel for narrow drawers. As a matter of fact, when I changed door styles for budgetary reasons, my biggest criteria was that the drawer style be the same!

    Here's my original door choice w/drawer (it's big so you can see all the details!):


    The door style we ended up with (still has the "mitered moulded frame" and "beaded outside profile"):

  • 18 years ago

    Hit submit too soon, I meant to post this to show you what a 4-drawer stack looks like w/the above drawer style:

  • 18 years ago

    remodelfla: I saw that one link with the pics of the shaker doors and drawers - it's what got me thinking about just shrinking the rails. But the Shaker style is quite different from what we're going for. The other link (the first one) didn't work.

    ccoombs1 : How tall are your shortest drawers? Also, source for your pulls, please? I think they'd be a decent compromise for us.

    buehl: I can see why you went for that first design - it's gorgeous. The one you wound up with was a good compromise.

    Thanks for all the pics, everyone. I believe the plan right now is to get some cheap wood (maybe MDF) and do a few mock-ups of the various possibilities.

  • 18 years ago

    I'll measure the height of the drawers when I get home this evening. The pulls are from IKEA and come in 2 lengths. I used the longer ones on the drawers, shorter ones on doors.

    Here is a link that might be useful: IKEA pulls

  • 18 years ago

    LOL Buehl we need to shop together :oP I have your kitchen cabinets in my bathroom, and your oiginal kitchen choice in my son's bathroom (like you...I fell in love with them, but sheesh they were expensive!!! I used them in DS's bathroom because it was small and I really love them).

    OK Pb back to you....

    I don't think I have a pic, but I'll look. Our rental kitchen has mahogany cabs with a cathedral door on top and sot of slabs on the drawers. I saw sort of because the main portion of the face is slab, but the edges are routed in kind of like an ogee edge (like on granite). I would think if someone were making their own drawers, an ogee style edge would be the easiest. It's a nice design, and it cleans up easily since the main body is flat. They also work well on thin and fat drawers....ok now let me look...

    Oh here I found one. It's not the best (it was taken on my first walk through before we purchased) but I think you can see the drawer and lower cabinet door profiles (the uppers are cathedral). {{!gwi}}

  • 18 years ago

    Hubby already has the router bit to do an ogee-type edge. Plan is to do that on all doors and drawers. Looking at your picture, that may just be enough on the drawers. Thanks.

  • 18 years ago

    OK...the drawer front is 6" high and the drawer opening into the cabinet is 4 1/2".

  • 18 years ago

    It was a blurry pic (taken by the agent) but I'm glad it helped. Honestly, I really like their profile. It's kind of timeless, and with a door that's a bit more formal (ie your upper doors) I think you need to do something more than just slab.

    I'm not knocking slab, because I have them in my shaker style kitchen....I just don't like them with "curvier" door styles.