Software
Houzz Logo Print
saskatchewan_girl

Will I need a bump out sink?

18 years ago

I just rec'd my Ticor sink from GTS and was looking over the specs and realized my measurements are 35 1/8" x 20 7/8". This is the sink I want, so buying an alternative is not an option. So far I haven't wanted a bump out sink but now think I may need one just so the faucets and tip out fit!!

I was planning have the regular 24" deep bottom cabinets but am thinking I might have to go for a bump out.

Any ideas or suggestions or pics?

Comments (10)

  • 18 years ago

    Most bumpouts use a 24" deep cabinet, they just move the cabinet out from the wall 3", and then there is some additional blocks of wood behind it and some carpentry on the sides to make the angle back to the rest of the counters. It does give you more room behind the sink, between the faucet and wall or window, though. If you are doing custom cabinets you could ask that the sink cabinet actually be made deeper instead of doing it this way.

    Sue

  • 18 years ago

    Sask girl, which GTS sink do you have? Is it a double or a single? If it's a single, then you'll most likely need to bump out. However, if it's a double, you might get by placing the faucet in the divide.

    A couple corrections to what Sue_ct posted...standard depth is 24" and bumped out depth is 27". Just moving the sink base cabinet out 3" may work, but you'lll have to order some skins to finish the protruding sides of the cabinet. Also, you'll have to think carefully about what's on either side of the sink base to make sure those cabinets or drawers will operate properly.

  • 18 years ago

    The sink I purchased is a double with the smaller sink on the right and a VERY large sink on the left. Actually I didn't think of the fact the faucets will go off to the side of the large sink................duh, what was I thinking.
    Still unsure if I should have the sink bumped out in a more 'contemporary' type kitchen.

    Here is a pic of the sink but I'd like to see one this size actually in. Pics?

    Here is a link that might be useful: Ticor GTS T405D sink

  • 18 years ago

    Sorry, I am just going by what my installer did and what I was told was standard in my area for non-custom cabinets.

    Sue

  • 18 years ago

    I have the 405D in a standard sink base, no bump out needed. It's a great sink, you'll love it! Our faucet reaches both sinks easily, and there was still room in our 36" sink base for the HW and soap dispensors.

  • 18 years ago

    OH... alku05, that looks great!!! Thanks for the pic. Love your faucets : ) Unfortunately no faucets in the budget for us........for now. I can't wait to wash my big frying pan or cookie sheets in one sweep! I was worried that too many different cuts would mean NO quartz due to $$$.
    Is that soapstone? I just rec'd my sample of soapstone today........very nice.
    Thanks for the input.

  • 18 years ago

    I love, love, love that my half sheet pans lay flat in the big side. So much easier to clean.

    My counters are granite; white andromeda. I keep saying that my next kitchen will have soapstone though. Although that statement is a facetious one b/c hopefully this is our forever kitchen. Perhaps my mom's or aunt's kitchen will have soapstone when one of them lets me redesign their kitchens...someday :)

  • 18 years ago

    Alku05: Love your sink and faucet! Is the large half of your sink large enough for large pots and pans? Is the faucet a Delta Allora? If so, does the faucet head stay in securely with the magnet? Or does it tend to fall out? Did you get the stainless finish? I was thinking of getting the faucet for my new kitchen I'm about to start.

    Thanks!
    Barb

  • 18 years ago

    Barb, sorry for the late responce; we were traveling. The large side of the sink is big enough for a 13x18" half sheet pan to lay flat in it. Plenty of room for big pots! The faucet is a Brizo Floriano in SS. Brizo is a Delta company. The head locks onto the stem with a quarter turn. However, I have heard recently that they were updating it to be a magnetic catch. We have no problems with a dangling head, and in general we love the faucet. The spray locks on, and you can't beat the ergonomics of a pulldown faucet. We even have the smaller prep version on our island sink.

  • 18 years ago

    Here's another pic of that exact same sink. Again no bumpout required.

    {{!gwi}}

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio