Software
Houzz Logo Print
michael_in_chicago

Zero radius sinks - too hard to clean?

18 years ago

As my sink choices are narrowing down because of cabinet size, I'm left with very expensive ones, or zero radius ones. I love the look, but are they always dirty in the sharp corners?

Comments (7)

  • 18 years ago

    We have one. Just plan on having a toothbrush or other brush that will clean the corners. Round ones are not as good.

    I probably do mine an average of once a week, more or less depending on what we've been cooking. I really like having no lost space on the edges -- having room to put large pans and cookie sheets in flat. Actually, I just love my big, deep single bowl sink!

  • 18 years ago

    I don't find my zero-radius SS sink difficult to clean at all, and I'm not finding gunk build-up in the corners, either.

    Here's what I wrote on another thread earlier today re: my sink:

    Clean up is as simple as can be. Some weeks I "clean" the sink once, some weeks two or three times (but I always rinse out the soap bubbles/scum after washing dishes to cut down on soap film build-up).

    To actually clean the sink, I use a little Cameo powder or Zud powder or liquid (will prob switch to BKF when I finish up the Zud since it's recommended for my All-Clad pots and pans, and the guy at the store recommended it for cleaning my new Le Creuset Dutch oven, too). After rinsing the powdered cleanser out of the sink, I either wipe it dry or just let it air dry, which doesn't take too long. Then I spray SS cleaner/ polish spray in the sink itself, or on a microfiber (3M's is good, and is certified food safe), and wipe. It's not necessary, but the oils in the spray help to prevent water spotting for a few days at least. Sometimes I just use the spray and sometimes just the powdered cleanser depending on how long I've gone between cleanings, or if I'm just in the mood to see the sink shine!

    I use the corner of the sponge, or the folded edge/corner of a paper towel to clean the corners so far.

  • 18 years ago

    So no particular difficulty with the corners for either of you, huh? I thought people complained about that. I admit I love the look. Thanks for responding.

  • 18 years ago

    No. I use a brush to clean the sink, and I only have to pay attention to the corners if the sink gets stacked up with heavy duty cooking. It's not an every time thing and just a few seconds when I do. I only use the brush because it's easier for me than rubbing a sponge into the edges and corners. I like having the handle. :D

  • 18 years ago

    I've got a BalancoPrecision zero-radius sink in my kitchen. Absolutely no problems with keeping it clean, even in the corners. The metal is so smooth, that not much can lodge in the tight corners.

    That being said, Blanco also makes sinks with 10mm radius corners. The look is very similar to the look of zero-radius, but with sightly rounded edges around the bottom of the sink and at the corners. You might want to check that out.

    Click on "Products" on the page linked below, then on the image at the far right.

    Here is a link that might be useful: Blanco SteelArt Sinks

  • 18 years ago

    I have to say, you've all put my mind at ease; thanks. James, I know about Blanco's 10mm radius (and Julien's 7mm ones), but the former's sizes are off for me and the latter would cost big bucks!