Software
Houzz Logo Print
hzdeleted_20943427

replacing flooring

11 years ago
After water damage, I must replace all engineered maple hardwood floors in open concept kitchen, dining & living rooms. Entry is tile. Kitchen cabinets are solid wood maple. Should I use fir on the floor? It is softer; maybe old growth fir?
Shall I stay with maple? or do I need contrast? Hickory? Tile in kitchen (won't match present entry tile)? Help.

Comments (23)

  • 11 years ago
    Love your place! You should put whatever you want on the floor, wherever you want it. Choose what works best in your spaces for the wear it gets and the look you want. The only issue I see with tile in your kitchen is where you would cut it off and start the wood.
    User thanked User
  • PRO
    11 years ago
    Hickory would work very well in your space. You have a bit of a rustic feel going on here with a few darker knots showing. The colour variation of Hickory works very well with maple as well as almost any other wood on the market (save for some of the "pink" cherry colours). The variation in Hickory will help blend with the maple as well as offer some movement or contrast without identica matching (too much maple).
  • 11 years ago
    Wish I had a wide angle lens to show how MUCH maple there is in the kitchen. Even the fridge is paneled in maple. Thanks for your comments. I agree that a variation with some medium colour tying in the dining furniture & other pieces might be a good idea. I just don't want anything too 'busy'. There's a lot going on in the space.
  • PRO
    11 years ago
    I wood have to agree with Stephanie. Character grade engineered plank hickory matches maple very well and is harder than maple.To further enhance the rustic look have your NWFA certified flooring contractor finish the floors off with a penetrating finish such as Rubio monocoat pure for incredible durability and little maintenence. I'm not sure what area you live in but I can supply/install/finish for you if your in western Canada.
  • 11 years ago
    Mmm. bit too contrasty for me I think. I've seen some with more even tones..therefore not 'character'? Learning the lingo, here.
  • PRO
    11 years ago
    Then pick a clear or 1st grade. It will be more " blonde". However the style today the " character " is all the rage. Walnut,maple,oak,hickory. Ppl want the look of wood. "Clear" grades are dated and from the 90's. It's your house thought and your choice. Then again what do I know right?!?
  • PRO
    11 years ago
    3rd grade maple looks exactly the same as the pics I've posted btw.
  • PRO
    11 years ago
    This is 3rd grade maple 2 1/4" finished with RMC pure.
  • 11 years ago
    flooring has to be 3/4" to be same thickness where it meets the bedroom (not replacing per ins. claim) and tile entry and laundry room.
  • 11 years ago
    Am considering old growth fir with very fine grain but WARM and a definite contrast to the maple. I've even brought some grey toned maple samples with a bit subtle yellow. However, they're all very flat looking.
  • PRO
    11 years ago
    Be aware vertical grain fir is very soft much like pine/cherry. I personally like the V&G fir. It's super stable
  • 11 years ago

    I brought home a sample of walnut and there was just enough gold to tie in the maple. My eye keeps going to it; warm, glowing. The greys look flat in comparison. What is V&G fir? Sorry I should google.

  • 11 years ago
    I'm considering strand bamboo. lots of color variations available and it's harder than oak. much less expensive than hardwood and more environmentally friendly/sustainable.
  • 11 years ago
    You should go with what your eye goes to...trends come and go, popularity waxes and wanes.
  • PRO
    11 years ago
    V&g = vertical grain
    Walnut is very nice yes. Bamboo is a waste of money,is a grass and glue pressed together so there's actually no way it's harder. The formaldehyde that it off gasses for years after installation makes it very UNeco. The edges of bamboo " shred" after time and bamboo shrinks on all sides of the board as opposed to just across the width like real wood. I will not touch bamboo. I won't install it or refinish it. Research it a bit deeper and you will find out for yourself.
  • 11 years ago

    I have heard of many issues with bamboo AND it's not cheap. Better to stick with the classics. use tile if you're located in a hot climate, it keeps your place cooler. Use wood if you're in a cool or moderate climate, as long as it's not too humid. Depending your tastes, consider stained concrete.

  • 11 years ago
    Think about stained concrete floors. The contrast of your wood and stained concrete is beautiful.
  • 11 years ago

    Concrete would be too hard for me to stand/walk on..and cold. In new construction, maybe, with heat under. I learned V G fir is over my insurance allowance as well as a couple of beautiful tinted west coast maple and a red alder tinted. Very rich and finished with a European wax. Looking seriously at a hickory without a lot of variance and a washed oak that's very soft with subtle greys and warm golds. All engineered to stay in my price range of course. There are now on,y three mills in Canada and the latter two woods are from Vancouver Island, so local, for me. Flooring now comes from all over the world.

  • PRO
    11 years ago

    The best V&G fir comes out of BC. I can recommend a few places if you like?

  • 11 years ago

    Did you totally refuse to consider cark flooring? Easy on the feet renewable & very many choices of color. Seal it properly & buy quality & it could last forever.

  • 11 years ago

    i live in BC, thanks, and have talked with three of them. All more than my insurance.

  • PRO
    11 years ago
    Call me Sherry. 7807077542