Software
Houzz Logo Print
stringz

Pre-watering before Fertilizing Vegetables

11 years ago

I have read on GardenWeb where some people (who appear to be educated) fully water the soil with regular water, and then at the end, apply the fertilizing solution.

It would seem like if the soil is thirsty and the plants need nutrients, it would be beneficial to NOT pre-water. Just apply the fertilizing solution.

(I do agree that applying some solution and then waiting a few minutes for it to soak in before fully applying the fertilizing solution greatly reduces run-off, however).

The way my thinking goes is this: if you pre-water fully with regular water, the plants are taking in water without nutrients, which reduces the effectiveness of the fertilizing.

Am I missing something? What is recommended?


Comments (5)

  • 11 years ago

    First, you don't want to fertilize a thirsty or dry plant.

    Second, the pre-watering allows any dry areas of the mix to become saturated, which (as you mentioned) helps reduce run-off. It also helps prevent possible root-burn. And it also partially flushes out excess salts that might have built up.

    When fertilizing, the nutrients are more evenly distributed throughout the medium.

    Josh

    stringz thanked greenman28 NorCal 7b/8a
  • 11 years ago

    Josh - I appreciate your response! I'm not sure I quite understand a couple of the finer points here, though.

    I can understand that if the mix is uniformly "wet" that the fertilizing solution would be able to move throughout the mix until it is distributed uniformly.

    However, if I watered lightly, waited a few minutes, watered fully until run-off to help flush salts, and THEN fertilized, I would think the fertilizer would simply pour out onto the ground as happens with regular water when the mix is saturated and more water is added.

    Does the fertilizing solution displace and replace the regular water, pushing the regular water out as run-off instead (first-in/first-out)?

    And, is the recommendation to not fertilize a thirsty plant based on the shock of a high solute fertilizer and not a low one (in other words, a problem for concentrated fertilizers but not an issue for half or quarter-strength fertilizers)? Or are there other reasons you don't want to fertilize a dry plant (I've seen the advice repeated various places, but never have seen "why").

    Many thanks for additional insight.





  • 11 years ago

    Greenman Josh, completely off-topic, but you and I are neighbors by not many miles. Since I am just getting into container veg gardening I'd really appreciate being able to see what you are doing and how. If you'd be willing could you email me at arnoldp@sbbmail.com to see about getting together? Thanks and cheers

  • 11 years ago

    Precisely....the fertigating solution pushes the water down and out; and, similarly, the very light post-watering drives the fertigate deeper into the root-zone. Since there are seldom roots in the top inch of potting mix, I figure any nutrients there are unused.

    Like I mentioned, you don't fertilize a dry plant because it can cause root-burn...the salts interfering with uptake of moisture (and other nutrients).


    Josh

    stringz thanked greenman28 NorCal 7b/8a
  • 11 years ago

    I appreciate the clarifications, Josh, last question...

    I'm planning to use Foliage Pro for my veggie garden and from past threads, it looks like you use FP as well.

    My question is this: Does FP have any color associated with it so I'll know when the FP has been fully pushed through the mix (i.e. when the FP begins to come out of the container's drain holes)? And if it doesn't, do you think it would hurt to put some food coloring in with it so I'll have a visual indicator of when to stop fertigating or how do you do it?