It might be a good idea to have two layers of curtains, one more sheer to let in some light, and the other a thicker fabric to black out the entire room:




let us know what you end up doing!

This is a tough one....
I agree with Kira, you might just have to do a sheer and a heavy fabric. As far as where to place these curtain panels, I suggest you get 3 different rods - 2 on each side of the shorter windows and the third for the arched window. So you would have 2 different tiers, the middle being higher/longer.. Or ....you can install a dual reflective window film (will keep some daylight out of the room) on the arched window and have one continuous curtain rod at the bottom. I hope that make sense.

Looks to me like your doors open in, both sides right? That's why they ve mounted the shades on the door. ?

There are various ways to address this issue. You can hang long drapery panels on either side of the palladian window with matching shorter panels on the outside of the two shorter windows.

Or you can have shades custom made or use a treatment that hangs from individual finials which would allow the treatment to echo the curve easily.

If her doors open in, you cannot hang panels over the paladian window that cannot be traversed off it.

I would love to find the answer to this problem. I hate paladian windows. All my clients that have them want me to disguise them. I just want to tear them out and put in transom or square them off across the top.

I would second that idea myself. They are what contractors "think" that people want in their houses. They are pretentious and outdated..the only place they did look good were in the original Georgian architecture...but I digress.

With doors opening in under that window you really need a rod to cover the entire wall, including that window and be able to draw them completely off the doors.

I don't know if it's in your budget to change the configuration of the windows and doors there, but if it is< i would do it,, because the previous owner came up with what you have now for a reason. The only change I coudl suggest short of re-doing all , is to hang some pretty drapes either side of the doors from as high as possible and leave what you have...or upgrade what you have on the paladian and doors. I know HD can do shades to fit any shape.

How about this? I saw a tv designer actually cover bedroom windows with an upholstered "tufted" piece that fit in the window exactly. It was designed to be able to remove easily. So, I guess a "finished" wood (or some sort of material on the outside view) but an upholstered piece (cut to fit the size exactly) for the inside view.

You know on third thought..I would upgrade all the shades to wooden blinds,.. on the doors and windows. Would try and get a custom made wooden blind for the paladian window, and then hang 2 long drapery panels each side of the door. The door is what it is.

The drapes would work. All she needs are stationary panels with shades.

Thanks all! You have all provided a number of wonderful suggestions for a tricky situation!

Unfortunately, its not in the budget to change the windows themselves :) To answers some questions, the doors open into the house, behind the door is a Juliet balcony. The room is two stories up and there are a tonne of trees which are quite nice to look at through the paladian window, so I would prefer to be able to see through this during daytime hours.

I looked into getting a custom wooden shutters and the cost was an incredible 2k.

I think the most functional (and possibly cheapest option) would be to hang long panels on each side of the paladian window/door combo, then shorter ones on the smaller side windows (3 rods).

Now the next dilemma....curtain fabric. I love horizontal strips not sure that they will work with the two tiered rods.

I also love some of the attached fabric samples...

Would appreciate your thoughts.

Some more options...

My idea for covering the palladian window is something like a very large Chinese fan that you could open and close. If you secured one side of it to the bottom of the window, you could fashion some sort of clear rod so you could lift and move the other side to cover the window.

It's basically what you have now with the paper shade, you just need some way to open and close it.

I think I'd address the paladian window by topping it with a nice, large upholstered cornice board that the sides tend to trail downward with the middle either arching upward slightly or coming straight across. You mount a cordless pleated shade up under it that can be raised and lowered with a long, slim pole that can be stashed under one of the drape panels that close completely over the doors when not in use. The pleated shade above can be color coordinated with the drapery fabric below and the cornice can be done in an accent fabric to hgihlight the height of the tray ceiling. Exciting look that brings all tthe mismatched levels and divisions together with purpose.

The pleated shade with the cornice covering will square off the arched window in a way that makes it appear to have been replaced without the expense of having to do so.

I would have wood shutters installed.

Greg's idea is brilliant.

I have similar windows and have attached photos of how we dealt with this dilemma. I hope the visual helps.

Here is a photo with the blinds and curtains open.

Boppy, do you have doors in the center that open inward?

Greg, do you have any visuals of your idea? It sounds great, I just can't see it in my mind's eye.

Kim, I like the fabric on the bottom left of the first set you posted (the white and gray). It's interesting yet still soft and muted. I also like the one on the right of the second set (the blue and brown) and the brown seems to go with your paint a little bit better. This is your master bedroom, correct? I would make sure the drapes create a soothing effect and aren't too busy- you want to be relaxed in your bedroom! What other colors do you have in the room?

Julie Thome Draperies: Our windows, pictured above, do not have a door in the center. In our family room, however, we do have a french door with floor to ceiling windows on either side. For that situation, we hung a single rod that reaches the width of the 2 windows and french door with 2 panels on either side that can be pulled closed.

I don't have the computer know-how to post something visual, sorry. I do have a paladium style window in my bedroom, however and I enjoy it. What I did was run a repurposed cornice board across it where it begins to arch and installed pleated shade under the lower portion. You have to get creative with those things. I enjoy mine... to a degree. lol.

How wide is the palladium? It looks huge? How tall are the walls? To be honest, I'd go back to your original idea of getting a new hard treatment on the palladium. I know you said it's pricey, but with the suggestions made here, you are going to get real close to that and in my opinion, still not have a good looking treatment. Get a quote on something besides shutters--say a white cell shade etc. I'd cover that window, hang side panels to the ceiling flanking it--just close enough to the doors so that they can still be open, and be done with it.

Palladium is over 6 feet long - I don't know exactly but the highest point on the walls is probably 12 feet.
Getting quotes on a few items... so will revert. Thanks to all for their wonderful selections.

Let us know what you do.

I would remove the blind in the palladium window but keep all the others for privacy and room darkening. Next, I'd do textured swirl of elmer's glue treatment on just the palladium window. Paint out just the door wall (or the wall across from it to add balance) in a lighter shade of the same colour (the dark accents it too much). Add grommeted, fabric drapery panels to the window (all across) all 4 pieces (window and door) in orange, browns and blues.

I'm sorry. Elmer's glue?

LOL, yes. It's durable and you can do any pattern. Cover just that one window. You can try it on a piece of old glass first to see if you like it.

They look great! Are you able to close the center curtains? Can't see the pattern too closely on the fabric but it looks really pretty. Glad you found a solution.

I have done this exact treatment on windows in a library and this is the best solution to an age old problem, the rounded palladium window. Your fabric choice and wall color are great together, enjoy your room!

OMGSH! It's just gorgeous!! Done perfectly!! Kudos, for sure.

This may be a crazy idea but for your palladium window fan Fold wall to fit into the window. It's stiff and will stay put while blocking the light.

...and the view. Just sayin.

Looks great! Are you able to open doors OK?