Software
Houzz Logo Print
neiljcard

Crassula Ovata Slice or Dice?

11 years ago

Seeking opinions please.

I carefully detached several leaves off of my Crassula Ovata (regular jade) and also from my "hummel's sunset" jade.

The 2nd batch of leaves I sliced off with my army knife.

Any guesses as to which batch will root first?

The attached pic shows the top 2 rows of the regular jade and the bottom two rows with the "hummel's sunset" variety.

I marked the leaves I cut off with a "C." The ones with dots I also cut but, I got lazy marking them.

Any input would be appreciated.

Thanks to all - NJC -



Comments (26)

  • 11 years ago

    Neil, I never have much success with leaf cuttings that are propagated by dissecting them with a knife. I did a batch once, and it all resulted in a pile of mush. Perhaps I'm cutting them is a wrong way.

    Where is on the other hand, the cuttings that are hand pulled are showing excellent results for me thus far, and I always make sure the leaves are plump/full along with some meristem tissues.

    So I'm placing my bet on dice! It will be really cool to see how they pave out.

    Bernard

  • 11 years ago

    Bernard- Thank you for your input, it's appreciated. Wouldn't it be great if they all rooted!? Unfortunately I won't be able to keep them for too long. I have run out of room to have any more plants. Let me know if you want any and I'll send them to you. My crassula ovata hummel's sunset is where I got most of the cuttings (the plant on the right). Later -Neil-


  • 11 years ago

    What a fabulous pot the Hummel's Sunset is in. You have some lovely pots there altogether, Neil.

    Neil thanked marguerite_gw Zone 9a
  • 11 years ago

    Neil, your plants look spectacular! Especially with the vibrant contrast of your pot.

    I know I should not, after receiving a bunch of jade cuttings from Howard, but I think I could give it a go to try and propagate some of your hummel sunset.

    You can email me my houzz user@gmail.com

    Bernard

    Neil thanked bernardyjh
  • 11 years ago
    last modified: 11 years ago

    I saw Bikerdoc is offering cuttings this weekend only, Bernard, including, I think, Hummel's Sunset.......... No, I got that wrong, sorry, his cuttings are Crassula ovata, what look like Gollum, and Crassula arborescens, the species, beautiful:


    http://forums.gardenweb.com/discussions/3101253/last-call?n=1

  • 11 years ago

    Marguerite, the cuttings I received from Howard were some Gollums and Hobbits. I believe Neil's Hummel Sunset are different type of jades right?

  • 11 years ago

    Yes, that's right, the Hummel is also a Crassula Ovata just golden/yellow/reddish/greenish. The more sun the more intense the colors get! It's an awesome plant I think.

  • 11 years ago

    If you have any extra to spare.....I also would LOVE a cutting of the Hummels Sunset!! :)

    Neil thanked LilBit7765
  • 11 years ago
    last modified: 11 years ago

    Will Hummel's Sunset leaf cuttings come true, does anyone know? I have a couple of plants myself, if they do I might grow a couple of my own leaves for amusement.

  • 11 years ago

    I am pretty sure I have rooted cut jade leaves before, just regular C. ovata.


    There is always room for more when they come from another member! That is why this is a big group of jade enablers. I just bought a new table for my plants and it filled up fast!


    I have some Hummel's leaf cuttings set aside, I think, but no roots yet, Margeurite. If they make it I will let you know :).


    Beautiful plants by the way, Neil.


    -Erica

    Neil thanked ehuns27 7a PA
  • 11 years ago

    I think we are all on the same addiction list, a few days ago my partner had to sit me down and give me the "no more plants" talk. I had that realization, but how can I refuse cuttings from fellow succulent loving forum-ers?

  • 11 years ago

    I was really wondering would they revert to ordinary C. ovata leaves when they rooted, but thank you, Erica.

  • 11 years ago

    I got you, Margeurite. If I get them to root I can see if they stay true to their trait. I have a feeling they will. We'll see if Neil has any success as well!

    Bernard, I think I have had that same talk, to no avail! Once I get them outside it is harder to tell how many I really have. We were sitting outside eating dinner the other night and I got the "wow, you have A LOT of plants" comment... Time for a subject change!

    -Erica

  • 11 years ago

    Neil
    I never really paid attention to leaves, usually used ones that were 'in the way' :-)
    In am also aware that some root easier than others. Jade (crassula ovata), hobbit and tricolor are just about fool-proof for me, I am holding back on rooting leaves, using just cuttings now.
    I have echeverias (Perle v.N; also Neon Breakers, shaviana, Black Prince, Topsy-turvy) that rooted from leaves very easily. Also pachyphytum oviferum, burro's tail-string of pearls and also big leaved burro's I believe is Harry Butterfield - but I am sure all of these are very easy for anyone. There are few more, just can't remember all of them right now. All of these received no special treatment. I would say that it is at least 60% and more that grew well.
    I never tried 'fancier' jades and plants like haworthias and similar. I am sure they would be more challenging.
    Here are few leaves:





    I pot them up once the plantlets are bigger (like PvN in last photo).

    I hope you'll post follow up on your leaves.
    Rina


  • 11 years ago

    Rina- I have 2 PVN. The shaviana is on my wishlist. What are all the green color leaves? you have like a ga-zillion of them!

    On my pvn they snapped off in a not good way. maybe I should try bending the leaf downward first and then a slight twist?

  • 11 years ago

    Deva, Bernard, Marguerite, I would be happy to send. not a problem for me at all. At least I know you would grow them and be good to them.

  • 11 years ago
    last modified: 11 years ago

    Neil
    1st photo: those are leaves from etoliated, kept in the quite dark room so it was all green (wintertime...) and knocked off the shelve by friend's cat echeveria black prince - I know they don't looke like it, but they are. Plant was all green, skinny leaves.
    While I never fuss about taking off leaves, it has to be taken right off the stem, perhaps slight twisting would help? If leave partially breaks it won't root.

    Howard (bikerdoc) posted few close-up photos in one of the threads.

    Rina

  • 11 years ago

    Thank you, Neil, you are very kind. I don't need Hummel's Sunset leaves as I have some, but you have certainly inspired me to try rooting HS ones. I have a lot of other leaves rooting, all babies green so far even from variegated jades, but I knew to expect that. According to info posted by Oksana, plants such as Hummel's Sunset are not true variegates, so maybe they will come true from leaves. Worth an experiment, I think :)

  • 11 years ago

    Marguerite- I have one leaf already with a little plantlet!!! I am very very extremely happy!! could you tell? LOL

  • 11 years ago

    LilBit7765- All I have are leaves. I will save some for you if you want.

  • 11 years ago

    Congratulations, Neil. When are you going to wet the baby's head? Or is that just an Irish expression?

  • 11 years ago

    LOL (((Marguerite)))

  • 11 years ago

    Neil - If you still have any to spare, I would love some HS leaf cuttings as well! I've been wanting one for a while but I never spotted any near where I live. And that's interesting, I never really thought about how I take leaf cuttings. It would certainly explain why some of mine would thrive while others just wither away!

    Neil thanked Tavar
  • 11 years ago

    YAYYY! Thanks Neil! I am so excited. I will PM you my info and if you have enough that propogate I would LOVE to add it to my collection! I promise to take good care of it!

  • 11 years ago

    Actually, reading again a comment by Oksana, I may have misunderstood, I think she says Hummel's Sunset is a variegated plant. Sorry if I got it wrong.

Sponsored
CHC & Family Developments
Average rating: 5 out of 5 stars6 Reviews
Industry Leading General Contractors in Franklin County, Ohio