Software
Houzz Logo Print
hzdeleted_5845483

Lawnmower recoil pulls rather hard

11 years ago

And occasionally will pull my arm back. I did some reading and saw that I could have a sheered flywheel key. Well I checked it out this a.m. and first when taking off the engine shroud i noticed that one of the back bolt holds was tore and so the shroud is no longer secured to the engine in that corner. I have also in the past had the recoil rivets come loose and had to rerivet them. Anyway- I checked out the key and didn't look sheered and maybe moved and slightly damaged a bit but nothing too bad by the looks of it. I received this mower from my grandmother with it being a few years old then and shortly after my wife hit a stump and blew out the blade adapter, maybe this damaged the key?!?

That being said the mower runs fine, leaks no oil, it's just simply hard on the shoulder and sometimes it will just decide not to start.

So question is, could the recoil not be sitting in the flywheel (cup) good enough and that could be contributing to the hard pulls/starts or do I have a flywheel key problem? Lastly should I start looking for a new engine shroud piece then too or is that corner not being bolted down not something to worry about? I'm wondering if it tore because of how hard it is too pull sometimes.


Any advice would be so greatly appreciated as my wife and I are penny pinching right now for a kid so if I can avoid taking this to the shop that would be great!


it's a 7 hp briggs on a Husqvarna