Software
Houzz Logo Print
gwlake

Bathroom tile

11 years ago

What would you do? As of now the shower has an outer wall. My vision is beige marble with this accent tile placed above the half wall. (Top I'm photo)

Or should I have the wall taken down and just have the right hand wall remaining? A clawfoot tub will be on the right hand side



Comments (12)

  • 11 years ago

    Can you repost your question? It is unclear to me what you are doing with walls, shower entry, and tiles.

  • 11 years ago

    I wish I had photoshop on my phone. Let me try editing. The best I can do is crop out the section I want torn down.

    I will have a clawfoot tub it is under a window I wanted a half wall of tile like in the picture However this whole wall was framed I was going to use glass on the sections I edited out My question is Should I have part of the half wall torn down and use glass there Leaving the section on the right With glass on the remaining enclosed area





  • PRO
    11 years ago
    last modified: 11 years ago

    We make every attempt to talk our customers out of marble in showers. Those beautiful crackeled tiles get a good sealer before grouting. Even then, they still may darken when wet.

  • 11 years ago

    What do you suggest for the showe rather than marble? Thank you for your time.

  • 11 years ago

    Thank you,. I am going to follow your advice. I really appreciate it. It makes good sense.

  • 11 years ago

    Porcelain, as Cabot & Rowe mentions is the way I would go too. I used porcelain in my rooms and am very happy with it. I have used marble boarders as deco on walls outside of the wet zones, and for my kitchen backsplash. But these areas see no water.


    gwlake thanked enduring
  • 11 years ago

    Thank you for all of the advice. I did change my selections based on this advice. The tile store tried to tell me it wasn't true and a good sealer would handle the problem. But I know they work on commission. So I changed the shower to the recommendations.

  • 11 years ago

    I think you will be very happy with porcelain, they come in very beautiful styles.

    gwlake thanked enduring
  • PRO
    11 years ago

    Read any bottle of sealer and you will find NONE of them guarantee waterproofing, stain proofing, or anything like that. All a sealer does is buy you more time to prevent a stain.

    gwlake thanked Cabot & Rowe
  • 11 years ago

    The salesperson told me hotels use marble and they have no problems. I thought I am in hotels all the time and the showers are always moldy with gross caulking jobs.



  • 11 years ago

    With natural stone you have to have a stiffer joist/floor system, unless you are on concrete. Marble isn't as strong as porcelain and can't take as much deflection in the floor as porcelain. Some marble is junk and will crumble with cutting. Some marble will show rust over time after getting wet.

    In the second bathroom I put remodeled, I used a very nice marble look porcelain, through body, tile on my shower walls, and a Kohler cast iron shower pan. The room floor got a different porcelain tile. I used a carrara marble slab for my counter top. It is beautiful.

    The mold and poor caulking you refer too are unrelated to marble. Mold is from poor maintenance, and possibly poor installation. Poor caulking is bad installation and possibly poor quality caulk. I quickly, but completely, wipe down my shower walls and caulking after every shower. I use a microfiber bar towel. I squeegee the shower doors after every shower. I always use my exhaust fan and let it run for the duration of the shower and another 20-30 minutes following, to really get the moisture out of the room. I used quality Latacret caulk. I do not have a mold problem and I believe these steps I've taken in maintenance and quality products really make a difference.

    gwlake thanked enduring