Software
Houzz Logo Print
victoryismymiddlename

Looking for a copy-cat door

Hello everyone,

This site is more community based and respectful to people who try DIY on a tight budget $15,000 and under. So, I would like some help. is there a door from another maker or very similar door to the one below. I am looking for the extended cove inset look\. My plan is to purchase IKEA boxes and do a different door.


SieMatic, Beaux Arts.02 · More Info

BeauxArts 02 – Euro Cucina 2012 display · More Info

The above cabinet maker is Seimatic.

Thank you in advance for your help.

Comments (17)

  • 11 years ago
    last modified: 11 years ago

    Victory, they're beautiful doors. The door below is from Conestoga Cabinets (CRP10382) and it's similar. FYI, yours look like full overlay doors to me. The first image gives the feel of an inset door because there is an end panel applied to that cabinet. Good luck!

    victoryismymiddlename thanked eam44
  • 11 years ago
    last modified: 11 years ago

    Linelle, you crack me up. It's actually a nice trick for those of us who want the look of an inset cab without the cost! End panels and trim pieces! I love, love, love the thin counter top. Gorgeous. What a great inspiration image.

  • 11 years ago
    • Thank you
    • So if I extended or added an end panel I can make the whole thing look like it is inset?
    • How would I describe the door is it really cove?
  • PRO
    11 years ago

    AFAIK, no door supplier is going to do a high-gloss lacquer finish like in your Siematic example. You'll probably need to engage the services of a piano finisher who knows the ins and outs of polyester finishes on wood.

    Judging by the light reflection on that cove molding shape, yes it is a flattened-off cove with a smaller radius and an extended almost-flat (but slightly ramped) part.

    Casey

  • 11 years ago

    You're welcome. You would use end panels on the ends and pieces of equal thickness (though not full depth) between the cabinets on install.

    victoryismymiddlename thanked eam44
  • 11 years ago

    No comment on where to get those drawer fronts but I think that is the weirdest hardware placement I have ever seen on the bottom drawers...just awful.

  • 11 years ago
    last modified: 11 years ago

    The Siematic example is full overlay. They are probably polyester on MDF.

    That handle placement is consistent through a number of examples of this door style that I've found. I am not sure what the idea is behind it.

  • 11 years ago
    last modified: 11 years ago

    I have some experience with that door and I can tell you that one, it's not a typical door at all. It's a two piece affair that has a routed frame with an inset panel from the back. I've never seen anything like it in other lines.

    Two, it's a chamfered style frame in which the chamfer is quite long and thin. This is what makes the light play off of it to give it that unique look. This also makes copying it next to impossible without a CNC machine.

    rail and stile profiles

    http://www.infinitytools.com/1pc-Rail-Stile-Cabinet-Door-Shaper-Cutters/products/1243/

    These cutters can't really be made with a deep enough chamfer to copy that siematic look, and even if they could, the lip would be so thin that there would be major breakage on each panel.

    Three, an attempt to get something similar from a local shop (even if they can do it) will certainly cost more than your $15k budget.

    Four, the handle placement was deliberate , it keeps all of the handles in the center of the drawer regardless of height. You could order them undrilled from siematic and use your own hardware if you want though.

    The finish is darn near flawless and you'd have to spend millions on a finishing line to get similar results. It's some of the best I've seen in the industry. A guy, a spray booth and an air compressor won't yield the same results.

    Re: the inset fakery - I've seen many attempts and none have been worth a darn. Even if you use eam44's method you'd still have no stiles and it'd look silly. If you want inset, just order inset cabinets.

    victoryismymiddlename thanked User
  • 11 years ago

    "Four, the handle placement was deliberate , it keeps all of the handles in the center of the drawer regardless of height."

    But why switch to the long ones on the bottom two drawers? It looks so weird to me to have short handles and longer handles on the same drawer stack and to have those longer handles screwed into the stiles.

  • 11 years ago

    Dunno, that's what the designer who came up with the program specified.

    What's the reason behind the design and placement of most decorative handles and pulls ??? A simple round knob or strap handle will do the job.

    I think it's just about choice and personalization.

  • 11 years ago

    Thank you xedos, Sombreuil and palimpsest.

    I was afraid that this would be style door would be hard to find. I have been running around trying to find something similar and nobody seems to have that single either.

    Also, thanks for telling me the finish. I though it was some extra high gloss paint i.e Brilliant finish from Paints of Europe or a wax gloss finish. I though even an automotive paint would be a good idea.

    Okay, then next question if I just picked the perfect ideal door is there a style that would give that smooth modern/ traditional feel. I really like how the door isn't extra precision with ultra straight edges. Something that says twist on classic.

    I will start searching for chamfer style doors

  • 11 years ago

    You would do best to look for door manufacturers that regularly work with IKEA specs, and see what they have to offer. But keep in mind that you're not going to sleep in your kitchen and stare at drawers all day. Sometimes you just have to approximate. If you can't afford the look you want, you may want to learn to love the look you can afford.

  • 11 years ago

    I just installed the Savannah door from conestoga which has a somewhat similar look. But nothing is going to have that gloss without some serious money.

  • 11 years ago

    eam44 I know..., but I have this vision that I want to manifest. It has been challenging to do so either because A. it is out of my price range or B. there is no documented precedent. However, I am enjoying every step. (Which is weird because I usually run in the opposite direction.)

    Plus, I am slightly obsessed over this kitchen. I just want to see if there are more possibilities or solutions I have yet to think of.

    Although, please continue to offer advice as every comment I receive gives me more knowledge and understanding.


  • 11 years ago

    Omega's Cayhill/Cyril door with the 5 pc drawer option would get you 85%. And they will do frameless, and a custom finish. Just no where near your budget for your specifications. Double your budget. At least.

    The doors are the most expensive part of any cabinet order. You aren't saving all that much by using Ikea innards unless you have much simpler tastes for the doors.

    If you used a 1 pc CNC routed MDF door (which won't have the crisp edges and corners, but will be stronger) and used a high gloss clear coat base coat system from an automotive line, then you could get maybe 80%. But, not under budget either. The finishing is going to be the fly in the ointment even if you get a door profile close to that look. You're going to have to downgrade your expectations in that regard big time if you don't up your budget. Finishing is an art. If you can't pay the original artist for the original work, you have to settle for the art student's experiments.

    My advice would be to save your money longer and go with the original. By the time you have more budget for your project, your lust may have cooled. If not, then you'll at least be able to do the project appropriately.

    victoryismymiddlename thanked User
  • 11 years ago

    While Sophie's lead is similar, it's a 5 piece mitered door and you'll notice they don't offer it painted ! There's a good reason for that. Every single one of those miters is likely to open up after install and crack the paint - which will look like doo. It's hidden with a wood finish.

Sponsored
J.Holderby - Renovations
Average rating: 5 out of 5 stars4 Reviews
Franklin County's Leading General Contractors - 2X Best of Houzz!