Do a search of solarwrapfilms. That should yield a website that will give you the information you are looking for.

I have a Riga greenhouse and I want to install something like a solar pool cover on my north wall and maybe parts of my end walls for winter insulation. I believe the solarwrapfilms is for use on a hoop house or something of that nature - am I correct?

What I'm hoping to find is how do others install a solar pool cover inside a greenhouse (so that snow continues to slide off the outside). I don't want to permanently add anything to my greenhouse so I'm strongly opposed to spraying any adhesives or gluing on Velcro to the ribs, etc. I did see these clips which look interesting from Charley's: Insulation liner clips

Has anyone else done this?

bump

bump. I also was looking to do this and would love any suggestions!

What I ended up doing is cutting the pool cover into strips 8" longer than my glazing. I then fished it behind my two shelves and cut slits where the shelves or supports go so that it could lay flat. With the extra 8" I have significant overlap between two pieces. I then ripped a plastic conduit which I attached horizontally just below my windows and continued fishing it up in the same manner. Currently excess material is hanging on my top shelf. Once I lock my back windows I will run it all the way to the ridge. Since I installed on my north wall I may leave this on year round as it is now and then roll up or down the last few feet for the winter. On the bottom I weighed down with small ripped sections of plastic lumber I had lying around.

I selected to cut since I didn't want to remove my shelves and horizontal supports. So far I'm pleased. Also the Riga allows hex screws to be installed in each rib which I used to support the horizontal pvc. So nothing permanent changed for my Riga.