Software
Houzz Logo Print
lkalzamora100

lets talk farm/apron sink installation

10 years ago

I am looking into getting a stainless farm sink for my kitchen. Right now I am looking into a Kraus as it seems to be well liked in the affordable price range. We will be using a 36 inch frameless sink cabinet. What is the biggest sink I should install? It appears from my searching that others have used a 36 inch sink. The 36 sink will involved cutting the sides. I am OK with that but am concerned that it will be next to a dishwasher without a cabinet. How will the countertop be supported if I cut the sides.

Is there stainless farm/apron sink that isn't a full wrap around that will allow me to keep the sides?

Comments (9)

  • 10 years ago
    last modified: 10 years ago

    I have a 33" SS apron sink, and I find it sufficient. It is so much roomier than the 33" double drop in that was in the cabinet before. (I hacked the front of the cabinet to accommodate the apron, and added a 'cradle' for support.) My oven racks lay flat (30" range), and my old dish drainer fits in one half, out of sight. I have runnels on one side, though, so rarely use the drainer.

    I found my 16ga sink on clearance from an eBay seller, but it looks exactly like a Kraus sink that was available on Overstock at the time. Have you checked Overstock for SS apron sinks?

  • 10 years ago

    thanks. I will look at ebay to see what they have.

    Any size sink will be larger than my current double. I just prefer the look of a sink that covers the whole front of the cabinet. But I don't want to compromise the countertop install.

  • 10 years ago

    will it be OK next to a dishwasher since that side will not have any cabinet walls?

  • 10 years ago

    Have you looked at other brands? I know you said Kraus fits your budget but other brands have different dimensions.

    Specifically the Kohler Vault and Strive. Both come in 36 SS apron front. The apron front is the widest at 35 1/2, while the top with edges is 34. The basin/tub itself is 32 1/2 and should drop in most 36 in cabinets w/o any problems.

    I actually have the Vault collecting dust in the garage b/c somehow it came with my blanco faucet. Still giddy over that find!

    What cabinet color are you planning on? I feel like SS apron front look the best in all white kitchens and why I won't be using the Vault in my nonwhite kitchen!


  • 10 years ago

    Wow a surprise sink. I need to have that mistake.

    Our kitchen will be white. So SS apron should look nice with all the other stainless appliances. I will check the vault and strive, but I remember them being about 2x the price. I am really over my appliance budget so I want to keep other costs down without sacrificing a lot in quality. My tentative $6000 appliance budget has become $14000 and still not done. I have to stop reading this forum and looking at items mentioned. This is why we are now DIY kitchen remodel.

  • 10 years ago

    This is what our 33" Kraus looks like installed.

  • 10 years ago

    thanks edenaurora a picture is always helpful. Is that in a 36 inch base? I can 't tell by the picture but I am assuming that you have about 1 1/2 inch of cabinet on each side of the sink?

  • 10 years ago

    I just measured it and it's 35" wide. Here's a better picture.