Software
Houzz Logo Print
ncdel

Help-builder put 4" granite backsplash on cabinetry...

10 years ago
last modified: 10 years ago

Our house was a spec and came with a four inch granite backsplash in the kitchen. We want to get a tile backsplash installed but have one major problem- the builder installed the four inch granite on the cabinetry panel on the side of the oven (picture yourself facing a single wall with ovens at the left, then 2 ft of counter, then stove- backsplash is along back wall like normal but also on the panel that is on the right side of the ovens). Obviously to remove this granite would damage the panel and we would have to replace the entire thing. So my choices are

1. to tile the space above the granite which results in 4 inches less space to plan a backsplash (we don't have a large space over the stove bc of a microwave so the backsplash everywhere around the kitchen is the depth from cabinet to counter) not to mention having to consider the granite in the plans for tile ideas, or

2. to remove all the granite backsplash in the kitchen but just leave that one random piece against the side of the ovens.

My initial thought was to keep the granite because just the one piece seems really weird but a friend said she wondered if it would really be that noticeable in reality...

i actually found a photo of what appears to be the same situation though they chose a tile that kind of resembles the granite so it blends...my granite is Giallo napole or something similar so wouldn't really be able to do that...[https://www.houzz.com/photos/uba-tuba-granite-with-brick-stagger-tile-backsplash-traditional-kitchen-indianapolis-phvw-vp~1204103(https://www.houzz.com/photos/uba-tuba-granite-with-brick-stagger-tile-backsplash-traditional-kitchen-indianapolis-phvw-vp~1204103)

i I am stuck on this and can't move forward...anyone ever encountered this before? I cannot fathom what possessed them to do that but I am stuck with it. Thanks!

Comments (9)

  • 10 years ago

    I can't speak to how much damage removal might cause, but I find the piece quite unobtrusive. Good luck.

  • 10 years ago

    It does depend on how much contrast--not alot in the sample photo.

    I would tile above it and not remove it. In your sample it would look less weird if the rest of the counter had the 4" granite going all around and tile over it. You can even tile the side of the panel up as far as the tile goes elsewhere, like the wall on the right in the photo.

  • 10 years ago

    It takes all kinds - I would do the opposite. I really don't like the look of tile above the short backsplash. I don't think most people would notice the random bit of backsplash, whereas I know the rest of the backsplash would drive me nuts. Bummer they did that! If you took the backsplash off the panel you could potentially tile over it?

  • 10 years ago
    last modified: 10 years ago

    In your example picture, the granite on the panel doesn't bother me. The tile extended on the opposite wall (adjacent to the TV) does bother me. I would try option #2. I typically don't like a 4" countertop splash combined with tile above..

  • 10 years ago
    last modified: 10 years ago

    Thanks all I took a photo so you can see ours which might help. the idea of putting tile where the granite is on the panel is an interesting one...


    I don't know if knowing more about how much wall would be covered in this way will help but To the right of the stove there is another 3 ft of counter, then it turns to another 3 ft and then the sink so in that area there is about 10 linear ft of backsplash total. On a different wall there is a counter/wall that is about 5 ft long and then we also have a sort of bar area adjacent to the kitchenthat will get a backsplash. This is the only area where removing the granite would be a problem.

  • 10 years ago

    I'd probably leave it and put a ledge for bottles/jars or an actual spice rack ...maybe with under brackets that run right down to the granite top in question....I use enough salts/peppers/etc..a few other things that any heat from ovens wouldn't hurt..and it's out of sunlight there..perfect spot for the right little rack.....search around,maybe a decorative plate on a plate frame attached to the wood..add something and the granite issue disappears...I don't think I'd tile the wood...leave it, if you don't want to install something on the wood.

  • 10 years ago

    Thanks! to clarify if I considered tile on the panel it would be just where the granite was removed, like a low border along the bottom like what you might do on a wall adjacent to a backsplash.

  • 10 years ago

    I would go ahead and try to remove it. It might not damage the panel as much as you think. But another concern would be what the edge looks like underneath. It might not be cut to fit the cabinet well, leaving an ugly gap. I'd still go ahead and try, you can always put it back :)

  • 10 years ago

    I agree with herbflavor - leave it and put something on the counter on that side - a utensil canister or the like. You won't even notice it's there.