Software
Houzz Logo Print
thaasjr

Radiant heat questions

10 years ago

Hi all. I am building a 2200 sq ft home that I would like to
have radiant heat in. I am planning on installing this in all of the
lower level (concrete slab) and upper level garage. I am considering 3
zones.

I am my own contractor and building this with the help of my father
and uncle. My uncle is a licensed plumber and electrician but has no
experience with radiant systems. He would feel more comfortable if we
got someone who's installed these systems before to help with the hook
up.

My question is, how difficult is it to install the radiant lines
throughout the home and get everything plumbed back to the manifolds?
Basically everything that would need to be done to pour my slabs. Once
we get the house sealed up I can find someone to help us bring the
system to life.

Do I need to know exactly what I am doing for a boiler/water heater/
heat pumps etc before I install the in slab portion of the system?

I have considered using an online store for the in slab supplies and
design layout. Does anyone have any experience with Blueridgecompany? I
spoke with them on the phone and they seem pretty knowledgeable. My
friend has used their pex with good results. I believe it would be 1/2
in O2 barrier line in 1000 ft rolls. Substantially cheaper than my
local stores. Is all pex of good quality?

Thanks for any tips and insights.

Comments (4)

  • 10 years ago

    Although this is a great forum, I think there are better places for such technical advice. I don't have any experience with radiant heat, but there is a sub-forum for it on greenbuildingtalk.com. That is also a great site for any energy-related building questions.

    I strongly advise that you research this thoroughly, as house-building technology is a fast moving science these days, and it would be a shame not to take advantage of the latest technology. Don't trust other contractors to be knowledgeable; some of them (at least around here) are still firmly entrenched in the 1960's. I designed and built my own house (and I'm not a professional), and the comfort and energy savings just amazes me after having lived 60 years without ever having lived in a fully insulated house.

    My guess is that the best radiant systems are designed to be fully integrated, so just installing PEX, and then cobbling it together afterward may not yield the best results.

  • 10 years ago

    We installed our own pex lines, then paid for a HVAC contractor to install and hook it all up...sounds similar to what your planning. Pex is crazy easy to install, and we stubbed it out in the mechanical room then he did everything from there on. Having the hvac person on board before we started was helpful in verifying what we planned to do. The only change we made was to increase the mechanical room size slightly to accommodate everything, but there were plenty of other things that go into the system, like the questions you asked, so I would suggest having your HVAC person on board, and do all your research before you start.

  • 10 years ago

    Radiant heating as an efficient and comfortable choice is not suited to all climates. If you live where AC is necessary in summer, have mild winters, or have wildly variant temperature swings from day to night, then radiant heating is a poor choice for your home v

  • PRO
    10 years ago
    last modified: 10 years ago

    I agree that radiant floors are a tough decision for homes that also include air-conditioning. Heat pumps that provide AC also heat, so your radiant floors would be a completely different mechanical system that is arguably unneeded.

    If you are building to international level building codes (2012, 2015 or current IECC) then there is the argument that radiant floors are less comfortable because of thermostat response delay. Most people's experience with their comfort is in leaky and poorly insulated homes. If you are going to build an inefficient home that performs at less than prescriptive code levels, they make more sense to include.

    If you decide to go through with it, be sure you involve the mechanical contractor who will be installing the manifolds and appliance. Include a Manual J load calculation to get a better idea of tubing layout.