Software
Houzz Logo Print
jetrash

Now the backsplash is messed up!

10 years ago

I had my heart set on a light grey grout line with my white subway tiles. I picked out a simple subway tile that has a 1/16 grout line built into it when you butt the tiles together so we wouldn't need spacers. One wall has been completed and the grout lines are not even. They are 1/4 inch thick in some spots and practically non-existent elsewhere.

I'm being told the only way to fix this is to use white grout so that the inconsistencies don't show too much. I really don't want to use white grout! So if I insist on using light grey grout am I going to regret it?

I've included pics. The grout is one issue but also the lines were messed up on the brick pattern and so we had to ask the tiler to put in little pieces of tile so that the lines lined up vertically. You can see what I mean in the third picture. Just above the top left corner of the framed herringbone pattern there are two small pieces that were added in to continue the flow of the line down the wall. This was also done on the bottom left corner.

It looks pretty messed up to me and probably to some of you too. But I'm thinking that to a regular person who doesn't hang out in this forum, maybe in the grand scheme of things the discrepencies won't be so noticeable? Especially once the range and hood are installed.

The close ups look yucky, but the third picture gives an overview from a distance and it resembles white subway tile with grey grout. Does it look SO bad?

I'd appreciate your input. The tiler is coming back to grout tomorrow morning :/




Comments (12)

  • 10 years ago

    What is up with your installer? I could probably live with the slightly uneven grout lines, but having to insert weird little pieces to realign the tiles is just terrible workmanship. Insisting the homeowner go with white grout because you can't install tile straight is super unprofessional.

    I hope this guy is, like, your favorite nephew who is just learning and getting started in the business and doing this for you for free.

  • PRO
    10 years ago

    Do-over.

  • 10 years ago
    last modified: 10 years ago

    Not again!

    What??? They put those stupid slivers of tile on one side and in the most noticeable spot next to the framed focal point behind the range?

    Im dumbfounded. That bothers me so much that it almost made me forget about the bad grout spacing.

    I am so, so sorry Saida.

    Oh sheesh, i just looked again more closely. The slivers I noticed on the left side of the framed area are probably not really called slivers. But look on the right next to the cabinet. Good grief.

    Here is what first caught my eye.

    And then here's the really tiny slivers all along this side.


  • 10 years ago

    How frustrating!

    I am afraid that it does, unfortunately, look bad. My eyes went straight to the strange slivers of tile that the setter put in the middle. I would have him rip it out. Also if he thinks that work is a-okay, then I would get a tile setter who knows what they are doing. I can not honestly believe someone would do that and think it was remotely acceptable.

    I hope your day goes better today! Good luck!

  • 10 years ago

    Yikes! I'm having subway with herringbone over range installed end of next week . I'll be showing him this!!

    That is unacceptable. Make him rip it out on his dime . Don't pay anything till it's done right .

  • 10 years ago

    I agree with everyone else, the grout spacing is not the biggest issue here. Your tile guy doesn't understand how to layout the pattern. I would honestly just find someone else to tile your backsplash.

  • 10 years ago
    last modified: 10 years ago

    When I went to visit one of the houses my builder was building, the tile guy was there laying subway tile in the upstairs bathroom. I was surprised he wasn't using spacers but the tile job looked perfect. All grout spaces were 1/16th and evenly lined up so I asked him how was it possible to get them even without using spacers. He showed me that the tiles had a tiny "lip" on the underside to butt them up.

    Your job is a hack job and you need to find a real tiler.

  • 10 years ago

    My tile setter spent a fair amount of time calculating the pattern over the range so everything would line up perfectly. Looks like your tile guy just started from the center and hoped for the best. I would not accept this work, so sorry for your aggravation.

    No spacers used here either- I think some guys are just really good at their job.

  • 10 years ago

    no no no. Sorry. :(

  • 10 years ago

    I also cannot live with those small pieces on the left side either. I would demand he do it over on his own dime as well. Sorry...

  • 10 years ago

    Sorry....it's terrible. Even my husband would notice all the mistakes and he's oblivious to this kind of thing.