Software
Houzz Logo Print
beenzmail

Replacing stove and confused

10 years ago

We have a traditional freestanding stove. I am getting a new backsplash and am also replacing the stove. I would like one without the panel in the back. I know there are the slide in ranges that will need a filler piece in the back. I might go that route, but are there any gas ranges that are flat but push against the wall? I thought I heard marketing for one but can't find it now. Thanks.

Comments (3)

  • 10 years ago

    A quick look at the pictures of the free-standing gas ranges available through aj Madison shows that at least Fisher & paykel and Electrolux have versions without the back riser. That's as far as I got.

    beenzmail thanked sjhockeyfan325
  • 10 years ago
    last modified: 10 years ago

    IIRC, GE stoves do not have oven bump-outs at the back. They are supposed to go flat against a back wall when replacing a regular freestanding range. I believe that this has been the case for GE's slide-in models (i.e., the ones whose stovetops have the slight overhangs on the sides to cover the gaps between the the stove and side counters.)

    It also is true for the GE Cafe line of stoves which are backless freestanding ranges. At least it was true 4 years ago when I considered buying a dual-fuel Cafe model.

    Now that being said, I also recall some posts here (with photos) about there being some gaps at the very corners of the very back of those GE stoves, at least the induction slide-ins. (Sorry, but I can't quite remember the GE Cafe dual fuel I looked at, but I kinda recall that the oven vent trim piece was a fraction of an inch less than the full width of the rest of the stove so there might be tiny corner gaps.)

    I recall posters describing some corner trim pieces that could cover those teeny gaps at the back corners. IIRC, there was trim piece available as a GE accessory but a company called MircroTrim supposedly makes better ones for a lot less money than GE charged.

    I think that some of the Bosch slide-ins have the same issue with little gaps at the back corners. Again, my failing memory being what it is, I'm not sure if that is all of the Bosch slide-ins or just the induction model. Again, Microtrim also supplies little trim pieces for those.

    My recollection is that Electrolux/Frigidiare slide-ins have usually had
    oven bump outs in the back. Not usually a problem with island
    installation, but it will keep them from going flat against a wall and
    therefore need a trim piece or revised counter tops.

    My memory is blank when it comes to Whirlpool products. I know I looked at one of that company's backless kitchenaid models but I can't remember if it had an oven bump-out or not. Sorry.

    My experience with pro-style gas ranges is with NXR which is what I currently own plus friends' Blue Stars, Wolfs and a DCS. All are are supposed to fit flat to the back wall. Those might not be what you are interested in, though. My NXR was less than $2k but the rest were all of $3.5k, so maybe out of the budgetary question?

    The caveat for those of us with old houses or old kitchens is that a flat back does not necessarily fit tight and neat because of uneven flooring or walls, off-kilter cabynets, and all the other odd little things that one only notices after installing the new stove in an old house. I'll bet you can guess how I know this. :>)

    One thing to keep in mind with any "flat top" gas stove that is pushed against the back wall, you will want to have a non-flammable back splash that rises at least 4" about the stove surface. That means tile, glass, or metal, not formica, corian, etc.

    Hope this helps.

  • PRO
    10 years ago

    GE cafe, Electrolux, Frigidaire, LG, kitchen aid and Jennair all have backless freestanding ranges. They refer to them as slide in sometimes but these have no overlap and go against the wall.

    That said do make sure to protect the wall behind them.