Software
Houzz Logo Print
amspinn

Help with granite stain!

10 years ago

Last week I discovered a liquid soap stain on my bathroom granite. We don't really use that bathroom so I am not sure how long the soap had been there. I wiped it and let it dry for a day. There was no difference. So I googled it and made a poultice with baking soda and water. I let it sit for 24 hrs and removed the poultice. Now I have a bigger water stain from the poultice. This is the third day and I don't see it going way. The stain seems to be gone but the area where I applied the poultice is still darker. I just tried to dry it a bit with the hair dryer. Don't know if I am helping it or not. Advice or opinions??

Comments (13)

  • PRO
    10 years ago

    Give it more time to dry. Some granites can really suck in the liquid.

  • 10 years ago

    Thanks so much---I'm hoping it just goes away, but seems to be taking a long time for me! Do you have a recommendation on a sealer?

  • PRO
    10 years ago

    I use Tenax Proseal. Try DeFusco Industrial Supply.

  • 10 years ago
    last modified: 10 years ago

    It can take a long time. Don't let anyone use that sink until the water is gone from the stone and you've put a sealer on it!

  • PRO
    10 years ago

    Light color granite "stain" with water. It's not a real stain, it's just darker because is wet. It will go away but could take days or weeks.

  • 10 years ago

    I always hire a good voodoo doctor. They curse the area around it to make it ALL dark.. then.. no problem!


    yes.. that was an attempt at humor.


    R


  • 10 years ago

    lol!

  • 10 years ago

    Update on stain status-- I THINK the stain is getting lighter. It is hard to tell. Never thought it would take several days to dry. I believe it was sealed, but will redo it with Joe's recommendation of Tenax Proseal. Just wish it would hurry up and go away. At least, from the pros here-- it sounds like it's hopeful.

  • 10 years ago

    The granite is still darker in the area where I used the poultice. It has been 10 days since I removed it. Do you think it still needs more time to dry?

  • 10 years ago
    last modified: 10 years ago

    I have an idea, but please let Joe weigh in: if you're sure your tops are already sealed, perhaps the sealer is just enough to inhibit quicker evaporation. If you definitely plan on re-sealing with Proseal, you'll need for first strip off the original sealer with acetone anyway (Joe will caution to be very careful with acetone as it's highly flammable). Why not go ahead and strip off the sealer now, in case it may allow the water to evaporate more quickly? Please read all instructions and warnings very carefully when working with these chemicals, if DIYing.

  • 10 years ago

    Just want to say that my stain is totally gone! I want to thank the pros that weighed in and for their knowledge to be patient and wait for it to dry. It did take several weeks. No one has used that sink and I have not resealed it yet. It was supposedly pre-sealed. The granite is brazillian giallo veneziano. I thank you again!




  • 10 years ago

    Thank you for updating this thread!

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio