Software
Houzz Logo Print
maryayuson

Christopher Peacock Motra Collection-help!

10 years ago

This is their modern collection. I haven't seen it in person yet. I did get an estimate and my husband flat out said no. I recognize that part of what I would be paying for is name brand. I would like to recreate the look (I'm confident I can get the look of the shelves, countertops and plumbing hardware) these are my concerns: is the look mostly made up by the exposed hinges and oversized hardware? Are the inset cabinets important to the look? I'm concerned that inset doors would warp, I'm at 6500 feet above sea level (Lake Tahoe) and the house will have radiant flooring. I checked out a local Omega cabinetry showroom and they showed me a warped inset door that they had to take out of a house it was installed in. So, my question is if I can find the hardware or get it made, would it look like a CP kitchen on frameless, full overlay doors? In a perfect world, I would get Henrybuilt cabinets with doors that look like these CP doors. I saw the HB cabinets and they are worth the money. I just want a different look for the doors and HB is willing to put in my hardware of choice.


Thank you, in advance, for your input!

Comments (9)

  • PRO
    10 years ago

    Wow, there is a lot of fussy detail in those cabinets. The "frame" on the cabinet door is so slim, I wonder if it's really more of an applied molding. The drawer pulls are exactly the height of the "panel" on the top drawers. In addition to the face frame into which the doors are inset, there are also vertical dividers that stick out past the face frames on some of the cabinets. That last item is easy to recreate, but the door style in combination with the hardware will be more difficult to find.

  • 10 years ago

    The rail and stile on the doors seem to be around 1 1/2". The drawers are inset with slab front and cutout done for the hardware.

    You do need inset to achieve the look and a finish carpenter to cut out the slab for the hardware.

  • PRO
    10 years ago

    beachem - I think the drawers/door fronts are not slabs, but some sort of unusual profile I can't quite figure out. Here are some detail pics:

  • PRO
    10 years ago

    Aha! That's a good theory, palimpset. I don't see the join between frame and slab in the bottom picture, but the image is a little dark so it might not be visible. Or maybe they did some sort of tricky miter joint at the back.

  • 10 years ago

    It looks like applied molding around the edges with veneer edge banding.

  • 10 years ago
    Thank you for all the comments! I'm impressed by the details! I decided to go with Henrybuilt. They showed me fancier looking kitchens that they've done and one of their designers is from CP. I won't be getting the same look but I decided to choose function and trust my instinct that I will be supported by good customer service. I really like that they have a simple, comprehensive contract and they seem honest and straightforward. Of course, the cabinets themselves are high quality and seemed intuitive to use when I saw it in the showroom. I've done several kitchens and have used Kraftmaid to Omega and a local cabinetmaker and I was dreading going through the process again. The house we are building is my husband's dream house, not mine.
  • PRO
    10 years ago

    Libaya - that's so cool that you're using Henrybuilt. Let us know how it goes!

  • 10 years ago

    This is a solid wood (oak or painted white) perimeter frame around a slab veneer door. Not had to recreate but still a bit of work. The only challenge is the handle. These are custom made but I've seem similar ones that could be used as a base but you would have to have them refinished in that color and had screws if you wanted to get close to that look.

Sponsored
J.Holderby - Renovations
Average rating: 5 out of 5 stars4 Reviews
Franklin County's Leading General Contractors - 2X Best of Houzz!