Software
Houzz Logo Print
mizsusan

Will 36" range hood be too big????

10 years ago

Will be removing the two little upper cabinets above cooktop. Cooktop is 36". Space between the cabinets will be 36". Will a 36" cooktop fit. Will it look TOO big? would I be better off with a 30" - but them will that be sufficient functually?? It is ventless or recirculating - no choice.

Comments (14)

  • 10 years ago

    I was thinking about something like this

  • 10 years ago

    It's usually recommended to have a hood 6" wider than the cooktop, so I wouldn't go narrower than 36". If you can post a pic that is taken straight on, I can copy and paste the hood in the space for you.

    mizsusan thanked mama goose_gw zn6OH
  • 10 years ago

    It'll look fine to have a 36" hood there. Do you plan to paint the remaining cabinets? The sides are probably not finished....

  • 10 years ago

    oh gosh.............I didn't even think of that. just assumed they were finished but probably not. that's not good since if i add a finishing piece, the hood won't fit. yikes!

  • 10 years ago

    Nothing's easy!


  • 10 years ago

    Better late than never. Here is a straight on pic. thank you

  • 10 years ago

    You may be ok. Since the lower side of the longer adjacent cabinets is finished, there is a good chance they finished the whole side. Only way to know is go there - you will have to remove the existing hood and short cabinets above it.

  • 10 years ago

    Maggie's right! You are probably okay with a little touch up. Probably! =D

  • PRO
    10 years ago
    last modified: 10 years ago

    Not sure of building code where you live, but here you can't have any combustible (cabinetry) lower than 30" above the range/cooktop. So, filling in to make it a 30" opening may not meet code.

    Personally, I like the hood you've posted.

    As for the finish, chances are that they are finished on the entire side, but there will be screw holes where they more than likely have screwed through the one cabinet into the adjoining.

  • PRO
    10 years ago

    It would probably be easier to use a wall-mounted hood such as a Vent-a-Hood, It will cover the sides and trim above with cover the sides and the vent pipe.

  • 10 years ago
    last modified: 10 years ago

    Sorry, I didn't get back to you until now, but here is the hood taking up all the space side-to-side--I extended the chimney:

    mizsusan thanked mama goose_gw zn6OH
  • 10 years ago

    I would only change to that hood if it was going to give you a better working hood than what you currently have. If you really cannot approve improve upon its function then I would do nothing. The one that you currently have does not get visibly dusty or greasy the one you are contemplating getting will definitely show grease and dust

  • 10 years ago

    The one I have now has the low setting (which I use the most) not working. I don't mind the cleaning - it is just my husband and myself. Really trying to spruce up the kitchen a bit. It's a bit dreary.