Software
Houzz Logo Print
reed_d

Question re: Unitized Washer/Dryer (Laundry Center) Sizes

10 years ago
last modified: 10 years ago

Some 24 in. unitized washers


list washer size drum sizes of 1.5 cf (Kenmore) and others are 2 cf. (GE) Does anyone know if they are truly the sizes listed or whether really all same size capacities?

Comments (17)

  • 10 years ago

    I don't know but I would think that if it was advertised as having a specific cubic feet size, that it would be that size.

    Have you thought of getting a 24" set that is not in one unit? Or are these single units smaller over all and you need it to fit into a tight space?

    Reed Dworski thanked enduring
  • 10 years ago
    last modified: 10 years ago

    I asked my original question because I cannot find a retailer in my area that has display models of these units for me to view and measure. I thought perhaps the units were all the same size but one listed at 1.5 cf and the other at 2.0 cf due to some sort of rounding difference or inaccuracy. The Kenmore is listed at 1.5 cf, but I can not ascertain who currently manufacturers it. The GE is listed at 2 cf. IF the GE is really 1/3 larger, I would prefer it even thought it currently $100 more expensive than the Kenmore.

    The only 24" set I have seen recently only had a 1.9 cf washer and was much more expensive when paired with a dryer. Also I believe those units are problematic if they are in a closet with door since the washer door should be left open, and it is a front loader.

  • 10 years ago

    I agree that a front loader door should be left open. I'm sorry I can't be of any more help. I hope someone with more knowledge in this area will post.

    Reed Dworski thanked enduring
  • 10 years ago

    I currently have my 24" front loader in a very tight front hall closet. I close the door on wash day until I go to bed then let the door stay open till morning. It was ten years old when I moved into this apartment and the former owners didn't leave it open at all and no mold. Those 24" top loaders can't even hold a complete set of sheets with 4 pillow cases. A relative I stayed with one summer had one, it was awful.

  • 10 years ago
    last modified: 10 years ago

    hmorton do you happen to know the washer capacity? 1.9 cf is actually smaller than the top loader from GE, and I cannot find any 24 inch wide currently being manufactured that are larger.

  • 10 years ago

    Maybe one has an agitator and the other doesn't? Or you're comparing DOE to IEC capacities?

  • 10 years ago

    suburbanmd, I would assume that the agitator is considered in calculating capacity, As far as I understand all new washers on sale today would list DOE capacities but I am no expert.

  • 10 years ago

    Reed,

    I think cubic foot is kind of a red herring when looking at specs. What types of items do you usually wash? I usually suggest weighing your clothes. The European washers use a weight metric to gauge capacity. You would be shocked as to how much can actually fit in a small front loader. The issue is really having a enough space in the unit once the clothes are wet for the clothes to tumble effectively. I have king sized sheets and I was three of them at a time in my Miele 6KG machines. No issue with tumbling and just because I am a daredevil, I spin them at 1200rpm!!! Sometimes even 1400rpm on the older machine:-) I find that in a top loader, the agitator takes up so much space, even in a large washer, you can't fit as much as you need in them.

    Good luck!

    Reed Dworski thanked homepro01
  • 10 years ago
    last modified: 10 years ago

    homepro01, all types of clothes are being washed. And while I really don't like unitized (stacked) washer/dryers that is all the space will handle. I am really just trying to figure out whether the Kenmore 1.5cf is really the same machine as the GE 2.0cf which according to Sears online support also manufactures the Kenmore. I am skeptical that GE produces a unit for Kenmore with approximately the same outside dimensions, yet it has .5 cf less capacity. If I did not mention it, the Kenmore does have a lower street price. After further research. I think it is possible the Kenmore is actually a Frigidaire or Whirlpool which do apparently produce 1.5cf units or the specs on the Kenmore or GE are just wrong. The only way I can think of to get a firm determination is if I can actually find some of these machines out on display. Maybe I can find them on the floor at a Sears Outlet? I have actually never been to one, but I know they sometimes have both brands at issue.

  • 10 years ago
    last modified: 10 years ago

    I think that they are really as published. The thin twin has good reviews but it really is smaller on the inside, it has that center agitator taking up a lot of space. I would check what model you currently have because some of the older models were full size sonif you bought a newer one, sight unseen, you may be in for quite a surprise at the missing interior washer space....I looked long and hard at these models and ultimately decided to go with a compact Electrolux washer and a GE compact into dryer… Which could be stacked but will never look perfectly beautiful together like the dark gray stacked Frigidaire.

    Reed Dworski thanked practigal
  • 10 years ago

    Are there online manuals for both? If so they might show enough detail to tell if the two are the same

    Reed Dworski thanked suburbanmd
  • 10 years ago

    Sorry I do not know the capacity of the top loader I used several years ago. My relative no longer owns that home.

    In a different apartment I owned a small portable top loader and matching dryer. It was from Sears. It did not have a center agitator and there was an available rack to stack the dryer. I believe it is still available in urban areas with small apartments. That machine held more and washed better than my relatives top loader. Are you against front loaders only because of the possible mold issues or do you have other concerns?

    Reed Dworski thanked hcbm
  • 10 years ago

    I ended up with 2 cf unit from GE similar to one pictured. I did look into getting a separate 24 inch top loader washer and dryer recommended on a plumbing website, but the dryer required a fairly expensive rack and it I would have had to spend $500 more in total. The washer would have been .6 cf bigger.

    I first ordered the unit bought from Home Depot, but their installers who are apparently GE sub-contractors said they could not place it in my laundry closet due to water line location issues and the dimensions of the closet. Another local company was able to complete the job with same unit without issue. Thanks to all you for help.

  • 10 years ago

    Glad you have it installed and running. Please provide us with a review when you get a chance to try it out on a variety of loads. You could start a new thread with the review, calling out the name and model number in the title. It will help in future searches if someone is interested in knowing more about the workings of your machine.

  • 10 years ago

    I was at Home Depot yesterday and saw the stacked models. Don't know what size they were, but if you are just wanting to go look, if you have a HD in your area, it might be worth a shot.

  • 10 years ago
    last modified: 10 years ago

    Jody, our Home Depot does not have them on display. Neither does Sears or Lowes to my knowledge. Apparently Home Depot uses GE to contract for all of their deliveries, and my salesperson said they often have problems. He also claimed that his superiors told him they could not use another company because GE would not allow them to carry their line. The last claim seems highly implausible. Going forward, I plan to buy from the local company (Bray and Scarff) because they price match, and their delivery guys are employees and did an excellent job.