Software
Houzz Logo Print
reeljake

Ok Bermuda Owners, Cut Height Changes Now

10 years ago

Its that time of year again when the days are getting shorter, so we need to drop those mower decks a bit. You should be at your highest cut of the year after August heat & now we want to start removing the false crown that has developed from our gradual raising of cut the last few months. You have 2 options for doing this, but whichever you use, get a sharp blade, avoid clumping & clean up any piles of clippings to avoid shading or suffocating the grass. If you haven't fertilized recently, do it after the first cut at your new lower height.

Method 1--Drop the deck one notch every 2 weeks thru the end of the season. This will minimize the clippings but leave you with a cheetah print color for a few days each mowing. Iron will help bring back consistent color, but it'll still be spotty.

Method 2--This is my preferred method. Drop down 2 notches, bag all clippings &your yard will be 100% brown for a few days but will come back with a stellar new green top. Come back up one notch on the next mow & repeat this '2 steps back, 1 forward' dance until winter dormancy sets in. You should be back to your lowest cut height 3 weeks before first frost so plan accordingly. If you live in a warm state without snow cover, let the top grow for a full week before the first frost so you have something to look at all winter.

I figured I would put out a public service thread since cut height is the main point of influence on Bermuda lawns. Blades & lawn trash bags are not expensive, but your mower needs to be in good shape for this.

Comments (57)

  • 10 years ago

    You might be surprised, Bermuda isn't much of a water hog.

  • 10 years ago

    Hello everyone, Im new to this forum and thought I'd weigh in on this discussion just a little as I am a bermudagrass owner and turf enthusiast. I think working the height of cut down on bermuda this time of year is a decent cultural practice especially if mowing with a reel and incremental hoc reductions are possible. If you live in a region with hard winters where winter kill could become a problem on closely mowed bermuda turf it is a good idea to increase hoc just a few weeks before frost. Personally I like to avoid an all out scalp at this point of the season just to ensure a nice thick canopy to insulate the roots heading into winter. Also I usually avoid late season apps of nitrogen as this could increase the potential for spring dead spot. For this time of season I focus on potassium fertilization applying 1lb to 2lb of K per 1000 sq ft using either muriate of potash 0-0-60 or sulfate of potash 0-0-50.

  • 10 years ago

    Sound practice

  • 10 years ago

    I really want to fraze mow next year, not just scalp in the spring... It is scary though!

  • 10 years ago

    Yes fraze mowing does look intense! From everything I've seen and read it definitely sets up the turf to have a perfectly smooth surface. Do you have a plan to conduct the fraze mow on your turf? Perhaps verticutting deeply in multiple directions could be close to achieving a similar result. I'm curious what you have in mind.

  • 10 years ago

    No, I don't have a plan for it, nor could I realistically bring a tractor implement onto my tiny property. Fraze is not really interchangeable with a y other methods, but there's plenty of other mechanical stimulation I could use, verticutting being the easiest to come by.

  • 10 years ago

    Yes that would be quite impossible to undertake in confined turf area with tractor and fraze mower implement. I have never used a walk behind sod cutter but I wonder if it could be set up to just remove that top layer like a fraze mow would?

  • 10 years ago

    Maybe...I never thought about a sod cutter

  • 10 years ago

    If it was possible to use a sod cutter I can imagine that would be a lot of work due to the amount of material that has to be removed. It doesn't seem very practical for a homeowner, very intriguing though. I think verticutting in early spring followed by a sand top dressing is one tried and true method to obtaining a smoother surface and more doable for most. My lawn isn't currently level so my hopes are to proceed with a round of leveling at the beginning of next growing season. One problem I am facing is I don't have good access to a proper verticutting unit. Rental shops in my area have dethatchers with flail blades rather than the delta blade that is desired for a verticut. I probably will attempt the dethatcher with flail blade setup but I have doubts that it will cut into the turf and soil as aggressively as I'd like. I have used one of these dethatchers before on someone else's lawn and it didn't seem to go down very low.

  • 10 years ago

    Have you look at the overseeders? Many rental places stopped carrying verticutters when the overseeders became more popular. Depending on the make/model of the overseeder it is simply a verticutter with a hopper for seeds slapped on top. Just leave it empty and use as desired.

  • 10 years ago
    last modified: 10 years ago

    That is a great suggestion, unfortunately overseeders are not readily available in my area of SC. I'm guessing there isn't a big market for a machine like that for rental companies here where I live. I would imagine those would be easier to find for rent in a region where cool season grass is more prevalent or either where overseeding of warm season turf before dormancy occurs more frequently, but I could be wrong. I'll probably end up attempting with a dethatcher next spring if I can't come across something more suitable. Hopefully I'll achieve somewhat of a desirable result.

  • 10 years ago

    The dethatcher will not do what you want, it only goes about 1/4" deep & it pounds it's way in rather than cutting. If thatch is what you're worried about, there are better ways to get it out, like aeration followed with topdressing, but bagging your clip is the best way to avoid thatch altogether. The flails of the dethatcher will beat the heck out of the crowns & rhizomes, then pull the stolons out of the dirt. Be prepared to fertilize & topdress after all of these processes. The Bermuda can handle it, but its not to be taken lightly. The cleanup is always the hardest part.

  • 10 years ago

    Well I decided to go ahead and go with method #1.Main reason is with the drought I was starting to see alot of browing anyways.I dropped my mower blade one notch.I did bag all my clippings.I had about 10 wheel barrows full and I am only halfway finished.Cant believe I had that much clippings.I plan on using the clippings to top dress all my areas I sprouted over the last month.heres some pics..Some places look worse than others but not to bad as I thought it would be, can see alot of green still



  • 10 years ago

    It's amazing how much organic material established Bermuda makes, that's why I try to bag clippings all year long. If you mulch Bermuda you better have a serious microherd to digest it all before the next mow. I'm not saying its impossible, but owning Bermuda is really an exercise in waste management. Mulch at your own risk. Case in point:

  • 10 years ago
    last modified: 10 years ago

    When I am dumping the clippings I noticed it has the same smell like a bag of seed has when you get from the stores after you open it.

  • 10 years ago
    last modified: 10 years ago

    So dont mow until 2 more weeks,correct ?And when I do lower the blade another notch?I am using the method #1

  • 10 years ago

    No no, keep mowing on schedule, never more than 7 days between cuts. You train the grass, do not let it train you. When you lower it again is totally dependent on how much time you have left in the season. I'd say every send mow at the earliest.

  • 10 years ago

    "I'd say every send mow at the earliest"

    I didnt understand this part

  • 10 years ago

    Also you mention go ahead and put down a fertilzer.This is what I have in the garage.would any of these be ok to use?



  • 10 years ago

    Sorry, 2ND mow is what I meant. Any of those would work except the last one. No preM after scalping for a few weeks

  • 10 years ago

    Thanks for your insight and advice on the dethatcher reeljake. My thought in using the dethatcher was more for working down high spots in the soil surface over the whole lawn after spring scalp in preparation for leveling with sand. I expect it to look pretty ugly and beat up after this but I'm not worried since it's bermuda, I know it will recover. The terrain isn't terrible by any means, but I scalped at 5/8" this past spring and any lower my reel would have hit soil in certain places. My goal is to be able to scalp at 1/4" and work up from there through the season and hopefully still be under 1" by seasons end, preferably 3/4"-7/8" range heading into winter. As far as thatch is concerned, I actually leave the clippings from every mow except spring scalp and so far I've never had any thatch issues. I mow very frequently though, 2 to 3 times weekly. I feel this helps reduce size and amount of clippings allowing them to decompose faster. I also pay very close attention to my nitrogen input being careful not to push excessive growth. I do utilize a pgr as well which I've seen huge clipping reductions since implementing.

  • 10 years ago

    No problem, dethatching is fine in early spring & for the purposes you stated. I'm not going to argue with your clippings/mulching/thatch control methods if they work for you. I just can't get out there to mow that often, so more power to you!

  • 10 years ago

    Deck drop #2 complete

  • 10 years ago

    I just finished today.This was ALOT of work and I only dropped my deck one notch

    I have a mountain of clippings lol

  • 10 years ago

    Right? You just can't see the mountain of XL black trash bags hiding behind my truck. My place isn't big enough for a true compost pile, so they'll be headed to my Dad's place ASAP for "recycling".

  • 10 years ago

    Cant believe your bermuda does so good under those big trees like that.Here It would be very thin or bare spots

    reeljake thanked Randy Man
  • 10 years ago

    reeljake this is your 1st year with the Celebration? I spent some time with a sod farm manager this weekend. He was telling me how the Celebration was doing far better than expected. It was going dormant 2 wks later and coming out of dormancy 2 wk earlier than the other bermudas on the farm.

  • 10 years ago

    Well Randy, it didn't. It sucked. For 4 years I fought the shade with Tif419 & lost under those trees. My HOA requires Bermuda, so I resodded with celebration as a last resort this spring. The backyard gets full sun, so it was never an issue.

    Yes hawksster, this is my first year with celebration & it's been extraordinary so far. No difference between sun & shade, perfect color, amazing density, etc. We'll see how it handles the scalp this week, but I'm confident it'll grow right thru it as usual

  • 10 years ago
    last modified: 10 years ago

    Well after 3-4 days since the scalping I am kinda regretting it lol..Bermuda only stays green for about 4-5 months here in georgia and I feel I robbed some of that time away.I will do the scalping but wait till after it goes dormant next year.Plus I live on a steep hill and when I go short I see alot of deep/ugly scalping in certain areas because I have a few uneven spots in my yard.Yes I need to level them but its seems its a fight I cant win as there will always be more since I live on an incline.The height ive mowed for the last 2 months the uneven spots are a non factor(cant notice them)..I do mow my bermuda pretty high..With the height I use I only mow 1 time every 7 days so its alot easier for me.Plus It looks great, It isnt like I am running a golf course(golf balls would disappear in my lawn)..All I care about is it staying green and less mowing/work lol

  • 10 years ago

    Just went and got my mower manual because ive never knew the actual height ive been cutting my bermuda..I ve been mowing mine at 3 inches for the last 2-3 months..I just scalped it at 2 1/2 inches(dropping mower blade one notch)

  • 10 years ago

    Did you drop fertilizer after the scalp? Nitrogen & iron will solve that in 3 days. No sweat, it's Bermuda, no scalp lasts more than 7 days

  • 10 years ago

    I have a pretty big yard without irrigation and in a drought so doing sections in my yard one day at a time while watering it in.I didnt want to put down fertlizer without watering it in.So I got half of it fertilized and watered in.Will finish it up tomorrow.I did half the scalping sunday and the other half tuesday.Had a busy day monday for work,I got all the parts done I did sunday.Will fertilize and water in the half I did tuesday tomorrow.This is the fertlizer I put down


  • 10 years ago

    Give it a few days after the fertilizer. Or just bump the mower back up a notch if you can't stand the stems--Without irrigation you might have to compromise. Bumping back up now will give you a nice green top

  • 10 years ago

    What height did you scalp yours at in your pictures?

  • 10 years ago

    Good question, that's 2 notches lower on my troybilt but not sure what that translates to--I should have it memorized by now... I'll take a ruler to it & get a number. If I'm guessing, somewhere between 1.25 & 1.5

  • 10 years ago
    last modified: 10 years ago

    Hey Randy, what part of GA are you located? I'm over in SC. I'm not arguing against reeljake's advice at all on adjusting cut height because working the height of cut back down can work out well especially if you are maxed out with your mower height but I just wanted to share my thoughts.

    He is located in Houston from what I've read here and he said it is almost like a subtropical climate. In SC and I would imagine in GA too (unless you are in south GA) scalping this late doesn't allow a whole lot of time for full recovery and it kind of depletes the grass of its reserves that are stored in the roots to help it endure winter stresses. Cutting all the leaves off the plant does put it under stress but we are talking about bermuda here which we all know is tough tough tough so don't worry. If a scalp is needed to reset the height of cut, personally I would be doing it mid or late July to early August for SC and GA regions just to ensure the grass has ample time for recovery. Also I avoid scalping the grass in the winter after it goes dormant so the canopy on top provides some insulation for the roots during the freezing temperatures throughout winter. My normal scalp time is in mid March right before spring green up and I like to mow it down to the dirt for this scalp. I've been following these practices for the last four years with great success.

  • 10 years ago

    Can't argue with that--Each climate will have its own timing, as I said in the first post. I probably should have addressed the emotional impact of scalping as well!

    Randy, the good news is that if you really aren't comfortable continuing, simply raise the deck back up to 3" & you'll have a beautiful new green top of 1/2" leaves until first frost. This is the concept behind my 2-steps back, 1-forward method (#2 in OP). You've already done the hard part, which is living with a brown yard for a few days. Stopping the scalp now will not hurt anything, it just makes for more clippings to remove in the spring when the real scalp occurs & we take it down to the dirt. Hopefully this will ease your mind, my golf pad was scalped down to dirt & rhizomes (1/4") last Thursday, I mowed it at 1/2" Tuesday & this is it this morning:

    And here's a close up so you can see the density that results from all this:


    In answer to your question about my scalp height on the main lawn, I put a ruler to it & I was darn close! It's at 1.5 now, so the HOC on Tuesday was probably 1.25. And the rest is coming back well already, but needs a few more days.

    I can't believe how much faster the celebration along the patio has recovered. The Tif is at least 2 days behind it, even though it was all scalped the same day, Tuesday

  • 10 years ago

    Turflife,Thanks for the info.I am actually about 45 mins south of chattanooga in an city called chatsworth(near dalton).Its considered the carpet capital of the world.

  • 10 years ago

    I may have missed where you mentioned to adjust timing of this for different regions reeljake, sorry if I did. Nice recovery from the scalp, I think it's neat to see the difference between celebration and tifway. I have read some great things about celebration bermuda.

    I think the emotional impact might be the worst thing that happens doing this lol! This one guy in my neighborhood used to scalp his bermuda twice a month cause he only cut it twice a month and he never seemed to have any issues from what I could see. I love seeing my bermuda stay green after each cut though as it hurts my feelings to see scalp marks but we've already established how insane my mowing schedule is haha.

  • 10 years ago

    It's only natural considering how much time, effort & money we put into these lawns. Knocking the top off just seems so...wrong

  • 10 years ago
    last modified: 10 years ago

    My plan is from now on to keep mine at 3 inches.I plan on scalping it again in early march at 2 inches.

    IMO low bermuda is overrated( i undertsand golf courses have to do it)..One is you have to work/mow too much, two to do it right and make it look good you have to buy an expensive reel mower, three you dont want to be on a hill/incline(something I have),,four is you better not have bumps in your ground, i had alot of big trees removed from my property so have alot of bumps in my yard.

    Early spring is the only time Ill be lowering my blade from now on..Lesson learned lol

  • 10 years ago

    I agree with you on the "high maintenance" schedule--There's no fun in that for me. I don't mow the lawn more than once a week, but sometimes I'll do the golf pad twice in a week if I haven't made too many divots, or if I want to do some putting. I've made a few threads over the years about weekly mowing Bermuda if you search. Bottom line is almost any height works if you manipulate the stem height properly--They're just tiny trees so it's all relative stem to leaf ratio. Call it Jake's low maintenance plan! HOC is a hot topic for me, as I get a little pissy when people give up on their lawns because somebody made it sound harder than it really is.

  • 10 years ago

    I also noticed that I have a few spots that gets excessive run off from my concrete driveway..It was the prettiest and thickest before the scalp..But now its the ugliest.The reason why is since I am on a hill that these areas has stems that was growing sideways, What I mean is it even though I was cutting it 3 inches over the whole summer it really wasnt 3 inches.It was growing toward the bottom of the hill.("with the grain" in golf terms)If I actually measured the length it would have probably been 3 1/2 inches maybe more if I took and stretched the grass straight and measured it.So when I scalped it at 2 1/2 inches I took off alot of the top in these areas.These areas are still brown with little signs of green still.Has got me worried as I read on the internet that growing bermuda high and cutting it low could cause bermuda to die

  • 10 years ago

    No, you can't kill it with a scalp. Don't sweat that

  • 10 years ago

    I was promised rain this week...stupid weathermen. Web of lies!

  • 10 years ago

    So I slipped a disk in my back yesterday trying to lift the McLane pusher off my 4" tall patio & I feel like such an idiot. My wife has been taking great care of me, but it looks like I'll be stuck halfway thru my scalping project...

    Randy, you & I are quitting at the same time this year!

  • 10 years ago

    That sucks reeljake,Hope you heel up fast man!

  • 10 years ago

    Sorry that happened to you reeljake, hope you have a quick recovery

  • 10 years ago

    Thanks brother. Serious cabin fever is striking already! Luckily I work from home a lot, so my business hasn't noticed but I need to get out of this house & get some sunshine ASAP!

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio