Model Number WFW9150WW02 Serial Number HL12557355

This unit does not have a read out display. The only error I am getting is as it begins to spin starts off slow the unit stops flashes once beeps 3 times flashes once beeps 3 times flashes once beeps 3 times....

I had thought maybe a drain pump issues as we have had a few issues with these on the property so I had one on hand replaced it same result

The pattern of flashes on the cycle Status lights is supposed to indicate the error code. Should be a set of flashes 1/2 second apart, a pause for 2 seconds, then a 2nd set of flashes 1/2 second apart. Repeats until power is shut off. Other lights such as for cycle options may be involved, so make note of all the lights that are either steady or flashing.

The serial number indicates manufacture in the 25th week of 2011.

I put a video up on youtube of the error code it is giving.

https://youtu.be/WbqU4JWKClk

I watched your video a couple times. You apparently know how to access diagnostic mode but you're switching around too fast, not letting each error code display and repeat several times to count and confirm the flashes.

it will only flash the same code even with delay no matter what or what timing you push the buttons

OK then. Code F8E3 for example is eight flashes, two seconds pause, then three flashes. Five seconds pause and the code repeats. What code are you seeing?

It could be clogged, have you ever cleaned it out? Check YouTube for suggestions. Also Check the drum for a stuck sock!