Software
Houzz Logo Print
ruthj98

Having difficulty finding Turface. Can I use this product?

Was able to find Qualisorb. It says on the bag that it is amorphous diatomaceous earth plus crystaline silica (<1%). Could I use this as a a Turface substitute? If not, I don't think I will be able to make Al's gritty mix because it is very difficult (or very expensive) to purchase the Turface.

Comments (23)

  • 9 years ago
    last modified: 9 years ago

    Thanks so much for the information. I have seriously considered preparing the Al's gritty mix. I was able to find everything except for the Turface here in Canada. I will enquire at Plant Products as to whether they sell to the public, and if not, where I could get the product.

    I am able to find pine bark and have a bag of poultry grit. I was waiting to buy the gypsum until I found a source for the Turface.

  • 9 years ago

    Where did you find the bark? I never had much luck, whatever is available is just very large chunks. Only once I got reasonable sized bark but there was lots of sapwood in it too.

    newhostalady Z6 ON, Canada thanked rina_Ontario,Canada 5a
  • 9 years ago

    I have had a hard time finding pine bark too. The best one I have found is from Sheridan Nurseries. They have pine bark bags in small or large sized nuggets. For me, I would like the small nuggets even a bit smaller, but they seem to be good quallty. I have thought of asking the garbage men if the garbage truck could just run over a bag of it, but haven't had the nerve to try it yet! LOL! Maybe the pieces would be too small then? I have also tried the pine bark mulch from Home Hardware. It is by All Treat and is called Canada Red. It is not bad either. I remove some of the larger pieces but also break some up with my hand. That's when I start thinking about that garbage truck again! LOL

    I have some of the pine bark nuggets from Sheridan Nurseries. It is outside. If you want, I can take a picture of it for you. Hopefully you would have a nursery not too far away from you?



  • 9 years ago
    last modified: 9 years ago

    Thanks for the info. I have been to Sheridan and many other places. Even small nuggets are still little big. I use those for big plants like figs, brugmansias and so on. I do not use it in mix for succulents, just grit, perlite and some turface.

    newhostalady Z6 ON, Canada thanked rina_Ontario,Canada 5a
  • 9 years ago

    That is the smallest size of pine bark that I have found. My preference would be for it to be a bit smaller too. I use it for my hosta media. What about fir bark? That is used for orchids. Shouldn't that be available somewhere?

  • 9 years ago
    last modified: 9 years ago

    You can get orchid bark from Terra Milton but it costs a small fortune. Sheridan pine bark nuggets are way too big. There are a couple other places too but honestly it's not worth it.

    Make sure to call Plant Prod before going. Usually they have the 25kg Turface bags in stock but sometimes not, depends how many you need.

    Instead of bark, you may opt for pumice or lava rock. There is something Rina and I were discussing just the other day about trying... Lechuza-pon which you can get in Mississauga direct from their store.

    Depending where you get your grit from, you might opt to skip the gypsum because they have a little calcium added in. Also depends if you plan to rinse your grit first.

    newhostalady Z6 ON, Canada thanked ewwmayo
  • 9 years ago

    Great information, ewwmayo! I will call ahead to Plant Prod before I head out!

    The product Lechuza-pon really sounds interesting. I had a look at their site. Wonder if you can just use a regular pot instead of one of theirs. I've got a few indoor plants that need repotting. I am itching to give that a try.

    (Got my grit from a farm supply store.)

  • 9 years ago
    last modified: 9 years ago

    Lechuza-Pon is available on line only, not in the store...

    newhostalady Z6 ON, Canada thanked rina_Ontario,Canada 5a
  • 9 years ago

    But the site says: "Visit us at our LECHUZA Retail Store in Mississauga, ON and discover the secret to beautiful plants. . . "

  • 9 years ago
    last modified: 9 years ago

    From my email inbox: "XXXXX,
    We do not have any of the sizes in stock in the retail store. The LECHUZA-PON
    comes in: 6 litres, 12 litres and 25 litres.

    All sizes are available on our website at the moment.
    http://www.lechuza.ca/en/accessories-lechuza-pon/lechuza-pon/PON.html#q=pon&start=2&hitcount=3
    "

    I guess Lechuza-pon isn't the secret to beautiful plants, ahaha.

    newhostalady Z6 ON, Canada thanked ewwmayo
  • 9 years ago

    "I guess Lechuza-pon isn't the secret to beautiful plants" Good one! I can't stop chuckling!!!!

    Why is everything so difficult!!!!


  • 9 years ago

    Don't give up. Try to google "Orchiata New Zealand Orchid Bark". I have not used that yet, but I know someone said it is good. This products have different size for our need.

    newhostalady Z6 ON, Canada thanked Vincent Bama
  • 9 years ago
    last modified: 9 years ago

    hostalady

    I think almost every person making gritty or 511 first time is frantically trying to get exact ingredients. Until after a while (it may take long time :) they realize that there is no need to use exactly same ingredients, rather understand why they are recommended. And then they can be substituted with something else that is easier to find and has same or very similar function. I went thru driving mad & looking for bark...then buying smaller I can find - still too big to use - and breaking it, trying old blender...but pruners worked best except it takes loooong time. I gave up and read Al's article again. I do not use bark in gritty. Now I use what I can get easily and also consider price. Maybe I am cheepo, but am not willing to pay (relatively) high $ for a product that will cost much more to ship (only some stuff from Amazon has free shipping, but not buying from other sources).

    Lechuza-Pon looks great. I really like look of it. I am sure it works great too. These are the ingredients:

    Zeolite, German washed pumice, German, light Lava and a fully coated premium quality fertilizer. PON is free from contamination and pollutants.

    I do not have an idea if German pumice or lava is any better than non-German... The particles are great size, and it is washed. I sift perlite, even lower half of bag of grit. I also rinse them. I could 'sterilize' them in micro or by adding some bleach to rinse water, I think?

    I do not know anything about zeolite, found this -50lb bag of Zeolite- on Amazon for $34...no idea about it. (And some ridiculously priced packages specially for plants...)

    There is some cost in sourcing ingredients and making one's own mix, and that should be factored into cost of ready-made. If I had fewer plants, I would likely buy premade mix.

    For now, I use chicken grit #2 from farm supply store (50lb bags); perlite (bought in large bags 10kg/22lb) and turface (50lb bags) for gritty mix.

    newhostalady Z6 ON, Canada thanked rina_Ontario,Canada 5a
  • 9 years ago

    For sale: Blender for breaking down bark, $15. Only used twice. Haha. =)

    Honestly skip the bark because it is too expensive and too hard to find. Like Rina, I spent days and days driving around from Hamilton to Pickering trying to find suitable bark.

    newhostalady Z6 ON, Canada thanked ewwmayo
  • 9 years ago

    Thank you Rina and ewwmayo for your comments. I have to say that I had to laugh because (1) Rina you get what I am trying to do and driving myself mad about it (trying to find the correct ingredients but realizing it is going to cost me a small fortune if I can even find them!). And ewwmayo, you probably knew that I too would be almost tempted to buy a blender to cut my bark pieces! And yes, I too would only be using it once to twice before I gave that up! We do almost anything for our plants, but then realize that it is just too much work.

    You both have given me great advice about giving up on the bark. I still have half of a Sheridan bag which I will continue to use for my hostas. I do actually throw out the larger sized mini nuggets and break up some of it with my hands. I find that the Sheridan mini nuggets are thin enough to be broken down by hand. If not, I throw them on my garden. But that takes so long! But we do what we think we have to because we love our plants!

    I love the idea of substituting perlite for bark. I imagine coarse perlite is preferred.

    Can't believe that you have to order the Lechuza-Pon. So they sell the pots and other products in their store, but the main ingredient you have to order? If I could go to the store and get some, I would. But if I have to make an order and pay for shipping, well then, I think I will just stick to the modified gritty mix for now.

    Thanks Vincent for mentioning the orchid bark. I did look it up to find it rather expensive to get here in Canada. It's cheaper in the U.S. So I think I won't be purchasing it.

    Regarding the pine bark size, I was at the Toronto Home Show a couple of years ago and thought I saw some nursery that offered smaller bark pieces. I just don't remember their name and cannot find where I put that information. If I attend this year, I'll be on the lookout and let you know should I find anything.



  • 9 years ago
    last modified: 9 years ago

    Where do you live in the GTA? I am cheap and don't want to pay shipping either! Maybe we could combine. I'm on the west side, so message me if you are interested - I want to buy just a single 6L bag to test/measure.

    My leftover bark goes to my orchids and tropical epiphytic cacti.

    In retrospect, it was quite the adventure finding the exact ingredients talked about so much, but at the time it felt incredibly frustrating. I don't regret it at all since I learned much more in doing so and can speak better about it.

    1:1:1 and 5:1:1 are just the beginning. Nowadays my focus is getting my hands on less common soil components (little more expensive) and optimizing my mix as best as possible.

    I see how much effort you're putting in - once you "pick" a mix to start with, hopefully you'll keep up that good work and put it forwards to then work on customizing your mix ratio. =)

    newhostalady Z6 ON, Canada thanked ewwmayo
  • 9 years ago
    last modified: 9 years ago

    You got me chuckling again! I am cheap too!!! I wonder what the shipping cost is. I reside in Etobicoke.

    All of this search for turface has been primarily because I would like to find something better for my container hostas. I had some rot last year (mostly my fault), and when repotting found a few hostas with partial root rot. That's a sign that my media could be improved and that I am not repotting soon enough. I have learned that media is very important.

    I would also like to minimize pest and disease of my houseplants. I was trying to find the ingredients for the gritty mix to try out on my houseplants and hosta primarily. I was able to find poultry grit and decided to add it to my hosta media, hopefully, to increase air flow and water movement. Even though I have documented which hosta pots I have added poultry grit to, I never marked it directly on the pot. I realize that I should have done that because I may think the pot does not need watering because of its weight. Oh dear.

    Looks like you've done a lot of work customizing your media. Great job and good luck!

  • 9 years ago

    I thought I will chime in to provide some alternate terminology to search for. Turface is "calcined clay" - that is clay fired at high temperature like pottery and brick. There are some subtleties like high or low temp fired. Clay fired at high temperatures are less likely to break apart. In many parts of the world, like in India where I come from, crushed brick (and sifted) is a popular soil component.

    In the bonsai world in US "haydite" is quite popular. Another name for it is "expanded shale". Mainly meant for a substitute for limestone in concrete to create a light-weight version of concrete. In comparison to turface it has slightly less water holding capacity. Another way to look for it is to visit concrete suppliers and ask for "lightweight aggregate". Light-weight aggregate refers to any concrete aggregate that is lighter than limestone and it includes perlite, pumice, lava rock too. Usually they are porous (to reduce weight) but robust rock like material (to achieve strength) in concrete world. Ideal for container plants. It is just hard to find a concrete place here and convince them to sell/give you a few buckets :( But my quest continues.

    Haydite is also used for the substrate in roof-top gardens and those eco buildings. So that is another way to look for it. Once I managed to get a few buckets when our university was building one of those roof top gardens for research purposes.

    There is also a new kid in the block - growstones. These are expanded glass and very light - bit heavier than perlite - but very porous like pumice. Last year I used for some tropicals and seems like a great component for soil-less mixes. The only problem is they tend to be a bit on the larger size - 1/4"-3/8" in the bag I got.

    newhostalady Z6 ON, Canada thanked tropicofcancer (6b SW-PA)
  • 9 years ago
    last modified: 9 years ago

    hosta lady

    Shipping for 6L bag of Lechuza-Pon is $5 (Kevin got message back).

    I have some hostas in containers, If I got any rotting (and I did, unfortunately) it was because they were sitting in wet soil for too long: now, I tip pots for overwintering. Adding lots of bark helps a lot too, and I do not worry that much about the size. Pots with hostas are much bigger than pots with succulents. I wouldn't worry much about adding turface for hostas - if there is any soil in your mix, there is no need for turface IMO. I use large perlite, some grit, as much bark as I can and some potting soil to make up the volume. If I had unlimited source of reasonable sized bark, I would use a lot of it.

    (Btw, I used to live in Etobicoke for a long time...most of my hostas were in ground then but I moved many plants and they are still in containers.)

    newhostalady Z6 ON, Canada thanked rina_Ontario,Canada 5a
  • 9 years ago

    Very interesting tropicofcancer! Thank you.

    Rina, I am looking into ordering some Lecheza-pon. My hosta containers are stored in the garage out of the elements. So the rotting I experienced last year was due to operator error---that is, too much water before they needed it. I use a non soil based mix for my hostas, and I am always learning and looking for more information on growing perennials in containers and their media. I thought an experiment using Turface in my hosta containers would be interesting. So we were neighbors once a upon a time?

  • 9 years ago
    last modified: 9 years ago

    Yes, we were, until about 2yrs ago :) I lived at Bloor & Islington area.

    LechuzaPon is probably very good, but depends how much you need. Shipping of order over $200 is free (as per mail to Kevin).

  • 9 years ago

    I just want to give it a try and so I'd like to purchase a small amount. (I am the cautious type!)

    Bloor and Islington is quite close to me!