Software
Houzz Logo Print
n01kar

kitchen not working

9 years ago
I am an avid diy and recently refinished my kitchen cabinets using an antique walnut stain finish. now that the entire kitchen cabinets have been done, the room has gotten clostrophobic and small. I have a very open floor plan. the living room is painted dark beige by Benjamin moore and the kitchen/family room is in nugget. any help would be appreciated on which direction I should in. I was thinking off adding some knows to take some of the attention away from the dark finish. help!!!

Comments (27)

  • PRO
    9 years ago

    Sorry but waht did you think would happen when you did the cabinets so dark?The wall color looks pink maybe start by painting it a lighter color and I don’t see much lighting so maybe under cabinet lighting will help.

  • 9 years ago

    I have dark cabinets in my current home. The first thing I did was lighten the walls. I would probably consider paint your walls Antique White SW 6119. I also agree with Patricia about lighting. I added both under cabinet and over cabinet lighting. Also decluttering your countertops and items on top of your uppers will help open the space. You may also consider installing a light colored tile backsplash and satin nickel knobs and pulls.

  • 9 years ago

    I agree to paint the walls lighter and better lighting. Consider removing the center panel in one or more cabinets and replacing with glass. You can use frosted glass if you want to keep the interior hidden. You might consider removing the microwave and cabinet above and replacing with a Stainless T vent - that would decrease the darkness in that area and replace it with a light area - plus you would get better venting and have a less claustrophobic range area.


    I really like this kitchen, but I would need lighter walls then this gray for my area of the country.

    Here is a dark wood kitchen that feels light - partly due to the countertop, but also the light backsplash and walls and glass doors:

    http://ths.gardenweb.com/discussions/4512247/finally-finished-with-kitchen-updating

  • 9 years ago
    I practiced in the bathroom with the same stain before taking on a big project like the kitchen. since I have no windows in the kitchen side of the house that is also contributing to the problem. I was thinking of using benjamin moore wheeling neutral or Shaker beige still not sold on those 2 colors. attached of what bathroom looks like plus paint swatches next to cabinet.
  • 9 years ago
    Use mirror for the backsplash. Put LED rope lighting on the top front of the upper cabinets. Light reflected on the ceiling relieves gloom.
  • 9 years ago
    Backsplash and under cabinet lighting! Maybe revisit your kitchen lighting too?
  • 9 years ago
    last modified: 9 years ago

    I think most Houzzers would steer clear of paint with pink undertones for this room. Are you trying to coordinate it with an adjoining room? If you don't like beige, consider a lighter shade of the gray that is in your countertop. Under cabinet LED's and new overhead lighting will help as will lighting above the cabinets. What is your current ceiling fixture? You can replace it with track lighting that is directional to highlight the cabinet doors and any remaining dark corners. When budget allows, if you can still get your cabinet style, it looks like you have room to top them with lighted shorted glass door cabinets.

    Over cabinet lighting

    Marble - White Carrara · More Info

    Toppers above your existing cabinets

    Modified Telluride by Candlelight Homes · More Info

    Track lighting installed in current electrical box

    Modern Transitional Buttermilk Yellow Kitchen · More Info

  • 9 years ago
    I used benjamin moore dark beige in my adjoining living and dining rooms the family room is opened to kitchen. it's the same color dark nugget as in kitchen. the color is beautiful next to Windows and gas the same depth as living room color. my concern is that if I go to light it may not complement the adjoining rooms and might look weird . I have one of these open floor plans and don't want a domino effect that I will have to repaint adjoining rooms
  • 9 years ago

    One way to keep a darker paint but still lighten the kitchen is to add a light backsplash or even a light backsplash and wainscot. For example the white tile in the second picture I posted above lightens up the dark wood kitchen even with the somewhat dark gray paint. If you do replace the micro with a hood, you could run the tile up behind it. As has been said, good lighting will make a huge difference.

    If you like to DIY, a backsplash can be a good project. I have a small (less than $100) wet saw that has seen me through 2 bathroom floors, a backsplash and an entire basement floor:)



    San Carlos Craftsman 2nd Story Addition · More Info

  • 9 years ago

    You might stick to the same family of colors, but go lighter. Check what else is on the color strip card for your nugget.

  • 9 years ago
    just ordered some hardware ware samples. what color/material do you suggest. want something timeless in the rare chance the dark cabinets never grow on me.
  • 9 years ago
    color/ material of back splash
  • 9 years ago

    everyone has given you great suggestions. cabinet hardware in the ss or nickel bars. lighter paint on the walls that is not pink. I think removing a few of the center panels and replacing w/glass inserts is brilliant. Under-cabinet lighting also a must. don't know if you have canned lights or pendants, but they wouldn't hurt.

    Too bad you don't have a cabinet depth fridge. is there anyway you can push that back a few inches by stealing some space from whatever is behind the fridge wall? like, make a little niche for it. or if possible turn the studs to make room for a few inches.

  • 9 years ago
    no. the refrigerator is about 1 inch from wall lol. the other side of wall is a hallway. loved the thought of putting a hood over stove , but even though the kitchen is medium size there will be no place to relocate microwave. all the cabinets are overflowing . I have the developer recessed can lighting
  • 9 years ago
    last modified: 9 years ago

    I think the metal hardware, under cab lighting and a few glass panel inserts would be a huge improvement. you can do the glass panels yourself with a little DIY. 50 bucks per panel would be the cost, roughly. plenty of how-to's online. if you do the seeded glass or a frosted glass, you could still conceal your items but the appearance of 'openness' would be huge for those dark cabinets.

    Imagine if all these doors were solid how heavy it would look.

    I know this is a white kitchen, but these are as tall as yours.

    as for the splash, a tumbled travertine would work, or a 2x8 glass tile or even a creamy white ceramic. hopefully you could remove the 4" piece.

  • 9 years ago
    just order samples of knobs and matching handles in brushed nickel.
  • 9 years ago
    ordered these samples as well. what's your opinion.
  • 9 years ago
    last modified: 9 years ago

    I like the top two. the less fussy, the better. bottom pic isn't bad. remember, you have very long cabinets. you don't want to use stubby handles.

  • 9 years ago

    Elongated handles will look better. Also, steer clear of knobs or ends of pulls on lower cabinets and drawers that can easily catch on pockets and clothing.

    Yes

    5" Loop Cabinet Pull Satin Nickel · More Info
    No
    Cosmas 5” Hole Spacing Satin Nickel Euro Style Bar Pull · More Info

  • 9 years ago
    Look at BM Cashmere Gray which is a light green gray - hopefully my screen is somewhat accurate as far as colors for the walls. You also need to update the lighting. Others have suggested it, but if you can, you need LED pot lights, under cabinet lights and as much good light as you can. Also paint the ceiling a BM In your eyes blue color as that color will reflect light back into the room. It will look white on the ceiling.
  • 9 years ago
    have another stupid question for my fellow houzeers . I am going to attempt to install a 4x4 tumbled travertine tile back splash. I was thinking of either installing it staggered or on a diagonal. After observing the kitchen , what would I use you finish off the edge of tile that ends abruptly at the kitchen entrance and by the sink. I like the thought of an pre-made edge but on some photos I have seen on houzz it does not look as nice as using the actual tile. any suggestions? place note this is what kitchen looked like before I started the project. developer white washed cabinets
  • 9 years ago
    excuse the mess this was taken the morning of kitchen destruction lol
  • 9 years ago

    If the tile comes with a bullnose edge or pencil tile edge - both made for making a nice edge in just your situation, you can use that. If not the Schluter strip is fine - they come in different colors - so just try to either match the stone or go with a metal one that matches the other metals in the kitchen. The important thing is to know ahead of time what you are going to use. The one edge of a Schluter strip needs to go under the adjoining tile, so you can't decide after you done to go back and use it.

    I had one edge and used the matching pencil tile - it was a little hard to get to stay in place, so I asked over at the John Bridge Tile forum and they said it was ok to use construction adhesive on the back and tape it into place with something like painters tape till the adhesive was dry - like overnight.

    If possible, remove the 4" small splash before installing your backsplash. I did my backsplash - you will have a lot less cutting to do if you lay it straight rather than on the diagonal.

  • 9 years ago

    I've used the Schluter in two different applications now and am really happy with the finish it gives but I agree that a pencil liner tile is also a good option.

  • 9 years ago

    I'm not sure travertine is really light enough here. I'd go with the lightest cream that can be justified by tones in your counter. The light floor will make it all play well. (Also, travertine often trends pink, which is exactly what you want to avoid...)

  • 9 years ago
    last modified: 9 years ago

    karlene, if you can, use the 3x6 or even 2x8 tiles. the 4x4's (which I have btw, tumbled travertine) look a bit 'old'. And a thin pencil liner or the schluter strip is your best bet. travertine comes in different shades and tones (there are 20 different names/colors that I know of). Beige or Light, honed and filled, would be your lightest and creamiest. The Rosa is the ones w/the pink tones.