kitchen sink

9 years ago

So I have everything set for my new kitchenl that is, everything except the kitchen sink as the saying goes.

I know where I want it in terms of layout but I'm trying to incorporate a glass rinser (like they have at bars (something like this, though not necessarily this model: example )

I am getting a white quartz counter installed. How close could I install it to my sink? I have a 36" wide by 24" deep sink cabinet. Could I install it behind the sink? On the side?

I want to do some sort of black composite granite/quartz sink , single basin. Should I get one that picks up the faucet or not? Could I mount the glass rinser right next to the faucet and have the sink so it doesn't touch the counter on all sides?

I was thinking I should use a rail system for suspending the sink.

Any input would be appreciated! :)

Featured Answer

PRO

Joseph Corlett, LLC

9 years ago

last modified: 9 years ago

I like Sophie's idea better too, but I'll answer your questions anyway:

" How close could I install it to my sink?"

It looks like you could have the edge of the strainer sitting on the side sink flange.

"I have a 36" wide by 24" deep sink cabinet. Could I install it behind the sink?"

If you had another cabinet behind the sink cabinet you could, but wouldn't your faucet get in the way?

"On the side?"

I think so.

"I want to do some sort of black composite granite/quartz sink , single basin. Should I get one that picks up the faucet or not?"

I'm passing on the color decision, but I'd recommend you look at the Karran Edge series quartz sinks if we can't convince you of the Kohler Stages.

"Could I mount the glass rinser right next to the faucet and have the sink so it doesn't touch the counter on all sides?"

If I'm understanding your question correctly, yes, but you'll have to have a cabinet behind the sink cabinet or pull your sink base very far forward. I don't like this idea.

"I was thinking I should use a rail system for suspending the sink."

The Hercules Universal Sink Harness (Braxton Bragg) and the Sink Strap (Regent Stone Products) are better than rails, insert style fasteners, or Cinclips. They turn your sink into a truss and make changing a sink a one or two nut job without lying on your back. Insert style fasteners are prohibited by some quartz manufacturers. Karran Edge series sinks are adhered; no mechanical fasteners are needed.

Sort by:Oldest

Comments (6)

User
9 years ago
Why, when you will have a faucet, do you want an extra gadgety doodad to break and that doesn't really fit residential plumbing and that does the same thing as the faucet and a drainboard? Seems like complete waste. Why not just do a Kohler Stages sink if the drip tray is the primary attractant?
Related Professionals
Sarasota Kitchen & Bathroom Designers · Zanesville Kitchen & Bathroom Designers · Plainfield Kitchen & Bathroom Designers · Lafayette Kitchen & Bathroom Designers · Farmington Kitchen & Bathroom Designers · Dothan Kitchen Remodelers · Miami Kitchen Remodelers · West Palm Beach Kitchen Remodelers · New London Kitchen Remodelers · Florence Custom Countertops · Ashland Custom Countertops · Lewiston Custom Countertops · Akron Custom Countertops · Las Cruces Custom Countertops · Everett Custom Countertops
El
Original Author
9 years ago
Thanks for the advice, I'm familiar with Hercules harness, out of curiosity, why do you recommend it over rails in this case?

My thinking was that if i install the rinser with drain pan immediately next to the sink or next to the faucet (butting up against the back edge of the sink), then there wouldn't be as much material for the flange of the sink to press (and seal) against. Does the harness do a better job of mitigating this issue than rails?

Also, if I were to leave a gap in the counter, between the sink and the rinser, is there a limit to how thin such a gap could be?

Also is it okay to have the faucet mounted on it's own little peninsula of counter in the scenario where i have the rinser and drain pan installed next to it/ on either side of the faucet?
PRO
Joseph Corlett, LLC
9 years ago
"Thanks for the advice, I'm familiar with Hercules harness, out of curiosity, why do you recommend it over rails in this case?"

Any perimeter sink mounting does not turn a sink into a truss. Would you rather hang off a cliff by your fingernails or have a nice strap under your butt? Same thing.

"My thinking was that if i install the rinser with drain pan immediately next to the sink or next to the faucet (butting up against the back edge of the sink), then there wouldn't be as much material for the flange of the sink to press (and seal) against. Does the harness do a better job of mitigating this issue than rails?"

A harness is always pushing the whole sink against the stone, not just the edges.

"Also, if I were to leave a gap in the counter, between the sink and the rinser, is there a limit to how thin such a gap could be?"

That's probably going to be up to what your fabricator is comfortable with. I'd be much more comfortable with a thinner rail between in estone than natural stone.

"Also is it okay to have the faucet mounted on it's own little peninsula of counter in the scenario where i have the rinser and drain pan installed next to it/ on either side of the faucet?"

Without seeing any manufacturer's installation instructions, I suppose it may be okay, but it's still kinda weird. You may love it, but don't be surprised if the people who buy your home don't.
El
Original Author
9 years ago
thanks much for the input i know what I'm describing must sound like a franken-sink but there's a bit more to the install, just trying to understand my options for parking elements as it pertains to sorry for the sink and faucet. if i end up going that route, I'll be sure to post a picture.
El
Original Author
9 years ago
Ooph autocorrect got me there, should be placing elements and supporting the sink and faucet. Hopefully the rest is understandable.