Software
Houzz Logo Print
hayleymarks12

Laminate and apron sink question

9 years ago

Hi! We are remodeling our kitchen completely and had cabinets built for a 36" farmhouse sink. In the meantime, we have decided to go with laminate instead of granite. I have researched to find top mount apron sinks but I'm worried they will be too short in the cabinet hole since they are made to retro fit. What is possible for us to do here? We will have a dishwasher to the right of the sink, if that matters.

Comments (7)

  • 9 years ago

    The Kohler Vault is a stainless steel apron front sink that comes in a drop in style. There is a tall apron for farm sink base cabinets and a short apron style for standard sink base cabinets so make sure you order the "tall apron" style and make sure you order the drop in style - because it also comes undermount, and there is a single basin and uneven divide basin - so careful when ordering:)

    http://www.us.kohler.com/us/Vault-35-3-4-x-24-5-16-x-9-5-16-top-mount-single-bowl-stainless-steel-kitchen-sink-with-tall-apron-for-36cabinet/productDetail/kitchen-sinks/429136.htm

    You can probably get it less expensive online or through Home Depot. It is self facing, so very easy to install.

    The Ikea Domsjo is a drop in white fireclay sink and you are right - it may be too short looking. You can solve the too short looking problem by curtaining the sink, but that may not be your style. If you do the curtain, use a rod assembly that makes it easy to access the cabinet.

    Curtained farm sink:

    You can make this look more modern by using a modern type fabric like a geometric.

    The Domsjo is not very expensive for a farmhouse sink, but many report chips, pitting and sometimes crazing after a few years. However, by then you might be able to go with a stone like countertop. Then, later consider the Kohler Whitehaven (cast iron) - like the vault, it comes in two apron sizes. Like the Vault it is easy to install - just make sure there is enough face left of the front panel to work with a new sink.

    There are some granites that have come down in price and are competitive with higher end laminate. Also, I have seen some claim that laminate can now be made to do an undermount sink. I do not know how this holds up, and it could cost as much as a granite - but check into it.

    I got my quartz through Menards, and my neighbor got hers through Home Depot. While many have had poor experiences with Home Center stores, both of us had good experiences. My neighbor's was much less (LG Aria) at Home Depot. Mine (LG White Pearl sold as Flaked Pearl) was about the same as a K and B store - the quartz was less, but my installer was not cheap. However, when I encountered a problem, both Menards and their fabricator were very helpful and the problem was solved. You might check out home center stores and their quartz, granite and Corian.

    Beth H, a Houzzer on the Design Dilemma says there are "pre-fab" granites cut to lengths that are much less expensive, and then you pay a fabricator to cut the length and sink, and the whole process is less expensive. However, I have never heard of this in my, area and I have no idea how to go about it - but you can look her up and ask her.

  • 9 years ago
    last modified: 9 years ago

    Prefab is everywhere, but the way it works varies. In my area you can only buy prefab directly through outlets like Floor and Decor, where it's not much of a bargain, but if you go to a regular yard and take a "special" deal, it's always prefab but they don't mention that. So around here most type A granite is actually prefab, but not at the super cheap prices that used to be available in, say, CA. I knew someone there who got Chinese marble counters for her kitchen for $600, installed, about ten years ago.

  • 9 years ago

    Beth H is in California, and I think she does some house flips and that would be why she uses it.

  • 9 years ago

    Are you worried about a gap between the bottom of the sink and the cabinet? If so, that would be fairly easy to fill and match the finish of your cabinets.

  • PRO
    9 years ago
    last modified: 9 years ago

    Hayley:

    This Kohler K-3942 will work well as long as your countertop overhang doesn't exceed 1 1/2". It comes with a cardboard test jig so you can see if it will work before you attempt to install it. I've installed two; it's going to work.

  • PRO
    9 years ago

    Thanks wcjo. I appreciate that.