Software
Houzz Logo Print
ksblase

Crack in refrigerator panel

9 years ago

My daughter's kitchen is still not finished ( long story I won't bore you with), but it is extremely close to being done. We just discovered a crack in the bottom freezer panel on her solid quarter sawn doors. What do you think should be done? It is about 5 inches long where it is separated.

Comments (13)

  • 9 years ago

    Its not going to get better on its own. What does the kitchen installer or GC say about it?

  • 9 years ago

    We just discovered it. So far they have taken care of problems, but there has been a lot of problems. - misorders, factory mistakes, changes in installers and workmanship. To me, it looks like another replacement. This small kitchen has been in progress since December and replacements have been slow to appear.

    We'll talk to the kitchen designer to see what she can do. This is getting old.

  • 9 years ago

    That looks to me, like a seam in the panel that is separating. It is a place where two pieces of wood have been joined, but it looks as though the bottom of the seam has not been glued. It might simply need to be returned to the cabinet maker and re-glued.

  • 9 years ago

    Thanks eam44, we will ask the kitchen designer about that.

  • PRO
    9 years ago

    Your cabinets came with a putty stick. Use it and ignore this, please. Wood grows on trees.

  • PRO
    9 years ago

    And the warranty agent is going to take the putty stick that came with the cabinets and fill in the crack in half a minute if he has any brains in his head.

  • 9 years ago
    last modified: 9 years ago

    A 5" long putty stick repair, on a brand-new cabinet (on a class A surface, no less)? Joseph, I admire you, your work and your advice tremendously, but I'm shaking my head at you right now. :) I think doing nothing at all would be better than that!

  • 9 years ago

    Basic ''local custom'' cabinet construction error to do this in glued up solids. No room for a batten on the rear of that. The cabinets should have been done in rift sawn veneer over MDF for stability.

  • PRO
    9 years ago
    last modified: 9 years ago

    Sammy:

    What part of "bottom freezer panel" do you not understand? Look at the picture again, please. Those are floor tile. I'd putty this crack at eye level, and it's no where near that.

    This is an excellent lesson for contractors. If you've got a client who would not accept a putty repair on a bottom freezer panel, your "kook detector" needs recalibration.

  • 9 years ago

    The cabinets are Omega and I fear the crack will open more with time. Otherwise the putty would work, especially if this occurred well after after the kitchen was finished. I'd rather a fix if possible instead of a replacement because the stain may be slightly off in a replacement. Then again, I don't think my daughter wants to look at a crack in the panel for the next 30 plus years if it opens further. We'll see what Omega and the kitchen designer say and let you know.

    Has any one out there had this kind of crack and been happy with the repair? Or did you get the panel replaced?

  • PRO
    9 years ago

    It is unlikely that the crack would open further.

  • 9 years ago

    Looking at the grain, it does appear that glue is separating at a join – and the cause could be many reasons – too many unknown variables here. Unlike Joseph Corlett, LLC and Sophie Wheeler I am not a professional. I’ve done amateur wood-working in the distant past, and made mistakes (and I’m sure I’ll make more). I built an amour that cracked at a glued join that incorporated a 1 ½” thick spline running the length of the join – just after delivery a small crack appeared. I was notified, brought the piece back, replaced the wood, re-did the join in a different manner, at no cost, though I didn’t offer a guarantee.

    The cabinets are Omega and I fear the crack will open more with time. Otherwise the putty would work, especially if this occurred well after after the kitchen was finished. I agree with you, the panel crack might not spread, but then again it might. Personally, given how new this is, I wouldn’t take the chance it won’t spread.

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert