Software
Houzz Logo Print
nickliss

Table Advice

9 years ago
I have been redoing my kitchen and many of you have helped me along the way and I thank you.

Once again, I would like your advice.

I went from an oak kitchen to an off white one. My table and chairs now look out of place in my updated Kitchen. Considering painting it. Any thoughts on how to make this set blend more, color, type of paint to use, etc.?

Thanks for help!

Next up, backsplash. Can't wait to post pics of my kitchen completely done.

Comments (24)

  • PRO
    9 years ago

    Now that you have updated your kitchen if you can afford to do so I would purchase a new table and chairs!

  • PRO
    9 years ago

    Which btw....the kitchen looks great!

  • 9 years ago

    Wish I could, but I really don't have the extra money right now. This is why am considering painting it

  • 9 years ago
    You can easily sand the table top and stain it dark then tape it off and spray the base and chairs a cream to match ur cabinets or go for a gray to match ur granite.
  • 9 years ago
    Kitchen looks great and down the road you can get something new
  • 9 years ago
    last modified: 9 years ago

    Look into chalk paint. They have some affordable ones in the paint aisle these days that you can buy a premixed color or have it tinted the color you like. I do like the stain and paint look too as mentioned above.

  • 9 years ago

    i agree with gdevlinjr, having a wood table top is really nice, and i think the paint would get messed up fast.

  • 9 years ago

    OK, I like that idea. I will sand the top and have the bottom paint matched to the cabinet color. How dark do you think I should go with the top? Also, what should I do with the chairs - white, dark, two tone? I am afraid the chalk paint may be too vintage looking. Has anone ever heard of the new self leveling paint where you don't needs to sand or prep? I think Lowes sells it to be used for furniture or cabinets. Thinking of using that although my go to paint is usually BM.

  • 9 years ago
    Paint chairs to match cabinets. Leave table as is. When you can, buy a new set.
  • 9 years ago
    My thoughts were what chara just posted. Leave the table, paint the chairs
  • 9 years ago
    Or, get new parsons chairs covered in an off white fabric. Are you going to put hardware on the cabinets?
  • 9 years ago
    My concern is tables are heavily used so painting prep is key, also temperature and humidity. If you know someone that could spray your paint on that would be optimal.
  • 9 years ago

    Cabinet hardware being installed today. Brushed Nickel. The top of the table needs to be redone anyway, as my daughters ruined it with nailpolish remover. What do you think if I stain it a darker color (perhaps to match the base of the table or even darker)? It is a Canadel set. Wonder if I can call the company for matching stain. Parsons chairs are beautiful, but I really don't want them in the kitchen. Worried about fabric staining.

  • 9 years ago

    I would look in to General Finishes latex based Milk paint for the chairs.... maybe in a graphite or mid tone gray for the chairs to pull from the counters. You could paint the base of the table, but a stellar job on the table surface unless you put a piece of round glass is more difficult if it's used a lot.

    https://redposie.com/blog/where-in-the-st-louis-area-to-buy-general-finishes-milk-paint-redposie/


    General Finishes has a Java Stain which is durable for the top of the table with a poly acrylic protectant would work well. You could go deeper so the floor and table don't look all the same. Then paint the lower portion of the table with Milk Paint or just the apron to match the chairs.... lots of options and you might look at You Tube GF has many tutorials on both Gel stain for wood and also Milk Paint for chairs or table bases, etc.

    I have used Annie Sloan Chalk paint a lot. Not all Chalk paint is created equal. If you go Chalk paint I'd go with AS or Renaissance sold on Amazon. Those are the two best I personally have found that cover well.

    General Finishes Milk Painted chairs and table base as an example.

  • 9 years ago

    I just painted a bed frame with rustoleum painter's touch which is a self leveling paint using this blog as my reference and go to for the procedures. It turned out pretty good minus my inexperience which led to a few issues - like drips and such. I'm planning on doing the same with a desk - except staining the top and painting the rest.


    Painting furniture

  • 9 years ago

    I like the wood and the white. The wood warms things up a bit. I might get a white-glazed pottery bowl for a centerpiece, or maybe a lazy susan with white s&p shakers & other white condiment containers to complement the white. Also a wooden utensil holder & cutting board in the kitchen to complement the table and make it look like the wood table & chair's are carefully chosen rather than leftover!

  • 9 years ago

    Porter, I really like the example you posted. Do you know what colors where used there?

  • 9 years ago

    I would paint the table top the same color as the cabinets and leave the legs the wood stain. You might also paint the chair seats the cream color - or the chair backs.

  • 9 years ago

    I believe it's lamplight.... the dark color that is..... it's the milk paint by GF

  • 9 years ago

    Sorry, the table is lamp black by GF... same as above as well as the table and chairs posted prior.


    Queenstown Gray..... by General finishes. Their poly acrylic is very user friendly as well.

    You can look on their site or their You Tube Videos....

  • 9 years ago

    Queenstown Gray on table/chairs


  • 9 years ago

    Porter, do you know what the lighter color is on the tabletop?

  • 9 years ago

    I believe that's their natural wood on the table...not paint.

    Do you want to paint the top lighter?? I'd lean more toward the gel stain for the top unless you want to go lighter. If you want to go lighter you would need at least three coats of the poly acrylic or a round glass cut to fit the table.