Thank you for your question. The mirror is actually held off the wall with blocking, just enough to let the tile under the edge. It is attached to the wall through the blocking, not through the tile. The tile does not extend much under the edge of the mirror. That design should be able to handle the toggle. We hope that helps.

The Allen Construction Team

Where can I get the vanity

What is the height of each of the shelves from the floor?

The only height I have record of is for the top of the vanity (the shelf holding the sink) which is 34 inches. Unfortunately, I do not have an elevation indicating the height of the lower shelf.

Is that a floating tile wall, with backlighting,behind the toilet? If so, how was it installed? Just beautiful!

Thank you for your interest in our project. The tile was adhered directly to the wall. Earlier comments describe how the lighting behind the mirror was installed. As far as the light behind the toilet, it actually comes from the fixture in the ceiling.

Hope that answers your question.

The Allen Construction Team

Thank you!

Is that a 3D wall or tiles that you used?

It is the tile. It is a tile by Avalon in 24x24 tiles. The Model # is PMN71, in white. I hope this provides the information you are looking for.

The Allen Construction Team

Thank you!

What color is the wall painted? And is the title on both sides of the mirror? The only lighting that I see is over the commode. Is there other lighting? I was thinking of using the tile just behind either a floating sink or a look like you did.