Software
Houzz Logo Print
aalderfer44

Need advice re fence

9 years ago
last modified: 9 years ago

We had a clear redwood fence installed. The stain guy recommended by installer insisted we needed a semi transparent stain. We showed him numerous pictures of what we had in mind. What we got is too opaque. He claims he can sand some ofd and cover in clear. I am totally nervous and have litrle confidence in him. Any thoughts as to whether this will work? Here are pics of raw. Trying to add more


Comments (21)

  • 9 years ago

    What we got.

  • 9 years ago

    What we wanted.

  • 9 years ago

    Sorry if you disagree, but I'd say that's pretty close to what you wanted. The picture of the wood that you want looks like it has more graining to it. You can't change the underlying grain to the wood.

  • 9 years ago

    It was pretty much perfect before he put the second coat on. I was thrilled. His guy told us they needed the additional coat for protection. Here is how it looked with one coat.

  • PRO
    9 years ago

    Suggest leaving it alone. You cannot just sand a bit of color off. It could be stripped and recoated.

    Amy thanked PPF.
  • 9 years ago

    Thanks. I have no confidence in this guy now. He also told me that stain looks different on different lengths of board (one reason he claimed he couldn't approximate my pictures) which makes no sense to me. Would it be stripped by using a chemical or physical sanding to bare wood? I've actually reached out to Behr too to ask but No reply. I may just need to move past this.

  • 9 years ago

    Different boards of the same species do take stain differently, the stain will fade anyway. Wait before you do anything else, move on, looks good on this monitor.

    Amy thanked smileythecat
  • 9 years ago

    It looks like what you wanted. It is true that stain looks different on different boards. I think you are being unreasonable. It fades and you will probably need to re-do it every year or so anyway.

  • 9 years ago

    Respectfully disagree that we are being unreasonable as I don't feel our expectations were managed beforehand. To be clear, he's been fully paid so it's not as if he's being harmed in any way. I do appreciate everyone's responses though as I can see trying to sand it a bit is not they way to go and we should probably leave it alone.

  • PRO
    9 years ago

    What everyone's been saying is true. Leave it alone. Trying to do anything is going to end up being an expensive, impossible mess. It is close to your original concept and it does need the extra coat for protection. Otherwise, you'd be doing it over again after it quickly faded .... and unhappy with the result then. At any rate, it's going to weather out and you're going to be managing it best as you can and it will not stay true to your original desire. This is OUTDOORS. It is not the same as painting the kitchen or bath.

    Amy thanked Yardvaark
  • 9 years ago

    Thanks. In retrospect I wish we'd done one coat and then one coat of clear over it or just two coats of something transparent. In any case, going to leave it alone and will see how it ages.

  • 9 years ago
    last modified: 9 years ago

    It's going to fade and change so you're going to have a fence that changes over time no matter what you do. That's the way wood acts. So eventually you can redo it and see if you can get any closer to your vision. But even then, it could be temporary. Just wait a while and see what happens. No harm in that.

  • PRO
    9 years ago

    I agree Amy. Leaving it alone for now is a sound idea. My experience is things usually look and feel different down the road,

  • PRO
    9 years ago
    last modified: 9 years ago

    Just curious...is he using a water-based stain or oil-based stain?

    Water based stain acts a little like a paint, in that the more layers you add the more opaque the product becomes, and tends to sit on top of the wood.

    Most oil-based semi-transparent stains are penetrating stains, and do not require (nor recommend) a second coat, although some do allow multiple coats.

  • 9 years ago

    Amy can you do me a favor and tell me what the name of the two large plants by the center of the pool. Anyone? are they some kind of yucca?

  • PRO
    9 years ago

    I would live with it. No matter what you do the color will fade and gray out. Those are the best kind of fences anyway, otherwise you are a slave to restraining it every year, is this something you want to do? Good luck to you on your project.

  • 9 years ago

    Re plants, I think they are yucca but that is based on my trying to identify them online. They were here before we moved in (now more than 10 years ago). I believe it was water based. It was Behr semi transparent. I have the brochure he gave us at home. He basically gave us that and told us to pick one of the semi transparent ones.

  • PRO
    9 years ago
    last modified: 9 years ago

    All of the water-based stains are going to act the same way regardless of color (i.e., becoming more opaque and pronounced color with successive layers).

    Did your contractor say why he wanted to use water-based stain on cedar? There are positives and negatives to both oil-based and water-based stains, depending on the application.

    edit - (an "oil-based semi transparent" would have looked more like you wanted it to...at first...however, it is more prone to mildew, so not typically recommended for high humidity areas. in a high humidity area is can actually turn black from mildew, as the mildew feeds on the oils. It also needs to be finished more frequently.

    I am in zone 5, so I always factor in those when considering the best product for the client's specific application).

    The fence looks nice, and there is no easy way to change to something else, nor would you necessarily want to. You could always consider options in a few years as fence needs to be refinished again.

    Amy thanked Aaron Holland Painting, LLC.
  • 9 years ago
    last modified: 9 years ago

    Yes, those are yuccas. I would remove the multi-trunk ficus. You will be constantly trimming and the roots can do serious damage to your pavement.

    Amy thanked mmilos
  • 9 years ago

    I have no plan presently other than to see how it goes at this point.