Software
Houzz Logo Print
3katz4me

oh wise ones - please advise

9 years ago
last modified: 9 years ago

Hi - I don't post much here though it was the laundry forum that brought me to gardenweb many years ago when I was trying to decide if I should by a FL washer. Now many years later I've had several and have been very happy with all.

My current issue is with a new to me dryer that came with a house we bought. Some 2014 Samsung model. I don't believe I ever recall having a dryer that consistently wadded everything up into a tight, wet ball. This doesn't happen with clothing but sheets, quilts, etc. Doesn't seem to matter if it's a relatively small load or a larger load. Either way I have to unwad it about every 10 minutes or I end up with a ball that's dry on the outside and wet on the inside.

I've had a couple Frigidaire's and a Kenmore branded Duet over the past 15 years or so and never had a problem like this. I would think all dryers are pretty similar but maybe not. Is there a way to prevent this?

Comments (18)

  • 9 years ago

    I don't have any advice on preventing the problem ... but design characteristics such as tumble RPM in relation to drum diameter, drum baffle design, and airflow patterns are contributing factors.

    Whirlpool had three selectable tumble speeds on top-of-line dryers for a few years in the early 1970s.

  • 9 years ago
    last modified: 9 years ago

    Gee - look what I found when I googled this topic. previous thread

    Guess I'm not the only one with this Samsung problem. I'm going to try this advice from the previous thread.

    My Samsung dryer balls up sheets and such from time-to-time. When it does, I remove the items, and without "un-balling" them, I replace them so that the side of the ball that was closest to the door is now closest to the back of the dryer. This way the dryer is rotating them in the opposite direction, and it "unballs" them. This usually allows them to dry with no further problem.

  • 9 years ago

    Is the lint filter sticking up at all? It should be flush. If it isn’t, there is lint build up under the filter which will need to be removed.


    Sticking up as little as a tenth of an inch can cause laundry to catch it and start to ball up.

  • 9 years ago

    Ya, I would not have chosen Samsung but since it was brand new when we moved in I plan to use it for awhile, especially since this is a second home. This situation isn’t caused by the lint filter. I think it’s just something about the design that’s flawed.

    I have to say I’ve always been happy with my Samsung TVs but they should probably stick with TVs.

  • 9 years ago

    I use tennis balls when I am drying comforters and sheets to keep them "fluffed" longer. It might be a decent investment if you want to keep the dryer longer.

  • 9 years ago

    3katz4me...

    Just to clarify, I'm not knocking you or anyone who has a Samsung.

    But a dryer is very simple machinery. The drum has to rotate enough to tumble the clothes through the current of hot air.

    Too slow a rotation and the clothes will roll, too fast a rotation and the clothes will cling to the drum wall. Either option is undesirable and it doesn't take a rocket scientist to understand this. AND to not even acknowledge OR deny your product is flawed is just infuriating to me.

    The vanes or tumbler fins also have an impact on how the clothes tumble.

    I swear they don't even test their designs before they go into production AND they have not changed their ways or learned from their past. They just abandon a current model and start all over with a new design instead of figuring out what works, what doesn't and correcting what doesn't to make a better product.

    You sheets will always roll into a ball in that machine. They programmed the rotation too slow.

  • 9 years ago

    I have said this here before and not sure anyone tried it or if it worked for them or not. With sheets, before putting them in the dryer fold each one as if you are putting them in the closet, same for pillow cases. Then put them into the dryer and dry as usual. It helped keep mine from balling up. Maybe it will help you. If not then you don't have to do it anymore. You might try putting one or two dry bath towels in with them. Might help the tumbling or just have a bigger ball.

  • 9 years ago

    I feel your pain! Our Bosch Nexxt used to do this with every sheets load and I’m a massage therapist. I had the best luck loading as @sparky823 states above. Sometimes I would pick the sheet up in the middle, fold it over my arm and slide it off into the dryer. Nothing worked perfectly but when doing over 10 sheets loads/week, you’ll try anything. Lol

  • 9 years ago

    I'll try a few of the suggestions and see if there's any improvement. I find it interesting, if not surprising, that this problem has apparently been going on for years with Samsung (and others it seems) and there is not a design change to improve the situation.

    Someone I work with just got rid of a relatively new problematic LG and got a new Samsung instead. Uh-oh....from the frying pan into the fire as they say. I will be checking with her to see if she has the same dryer problem.

  • 9 years ago

    Well I have had it happen with Maytag and Kenmore brands. May be worse with certain brands but IMO think it can/will happen with all of them now and then.

  • 9 years ago

    I have had various brands, nothing high end, just Whirlpool and Kenmore and have used several commercial ones at the public laundry and have always, as long as I can remember, had sheets and blankets ball up. I just always go and fluff them up and put them back in every 15 minutes or so.

  • 9 years ago

    My Miele reverse tumbles which is a nice feature for avoiding balling. Maybe try wool balls? Inexpensive thing to try and aww if it helps.

  • 9 years ago

    My sheets ball too in the bosch Dryer. I use dryer balls. Which appear to help w/ static but not balling. I will try the folding trick. Balling has never happened w/my Kenmore dryer.

  • 9 years ago

    I've probably had this happen occasionally with other dryers too but not like this Samsung. It happens every time and within five minutes of fluffing everything is wadded up again. I don't mind the occasional fluffing - maybe once per load now and then. However I'd much prefer not to have to attend to the dryer every five minutes.

  • 9 years ago

    Does it have a glass door so you can watch it? It seems like it’s getting tangled up on something.

  • 9 years ago

    My old Kenmore was a dream dryer. Hot as the hinges of hell, and nothing balled. My fancy Speed Queen is half as hot (probably thanks to the Federal Gov’mit ;-) and it knots up sheets like a rat’s nest.

  • 9 years ago

    I've had quite a few different dryers in my lifetime, and all of them have balled up sheets. I'm in the habit of 15 mins into the cycle, I go and unball sheets and put them back in the dryer. It was the worst when had a king size bed for many years. I had to put one sheet in the dryer at a time as the balling was crazy making with not only the general balling, but the top and fitted sheet would roll up into a one tight wad consisting of both sheets together. Now that we have downsized to a queen size bed, we can at least put both top and fitted sheet in at the same time. Still balls, but not together anymore, if that makes sense.


    I have a friend who got a new dryer a few years ago and she was upset that her sheets were balling now. I told her that I thought that was normal. She said it had never happened to her before. From the above comments, I guess it depends the spinning speed of the dryer. Learn something new everyday.