Also posted in the Kitchen forum, but i thought i would post here too, just in case -

My builder put in 8 of these in our kitchen(https://www.amazon.com/Halo-H995ICAT-Housing-Air-Tite-Shallow/dp/B0094GWFYK/ref=cm_cr_arp_d_product_top?ie=UTF8) and we would want to use a standard screw in base so we could use gold specular reflector trims.

Since the H995ICAT comes with a orange male adaptor, i am thinking of adding a female orange adaptor and then strip the pigtails of a edison base light socket and connect the pigtails to the female adaptor.

Female orange adaptor - https://www.ebay.com/itm/25-IDEAL-30-682F-18AWG-Solid-2-Wire-PowerPlug-Luminaire-Disconnect-182-Female-/131459329786

Edison base socket with pigtails - https://www.homedepot.com/p/LEVITON-Weatherproof-Socket-Black-R60-00055-000/100356874

Trim that i eventually want to use - https://www.amazon.com/Halo-Recessed-404RG-Supporting-Residential/dp/B005QG64US/ref=sr_1_1?s=hi&ie=UTF8&qid=1510383440&sr=1-1&keywords=404rg&dpID=31Hzj8W4FOL&preST=SY300_QL70&dpSrc=srch

Will that work as a permanent solution?