Software
Houzz Logo Print
jayj1983

shower panels in bathroom

8 years ago

i am doing a tub to shower conversion and the full body shower panel with hand held/rain head and multiple body jets look quite appealing, but i am worried they would require specialized plumbing and may break/leak over time. Plumbing mishaps scare me the most. Does anyone have experience with using these type of fixtures for a few years and what brand would you recommend, right now they are anything from $70 to $700. i am looking at signature hardware ones closely around $300. Thanks in advance for the advice !

Comments (10)

  • 8 years ago
    last modified: 8 years ago

    Retrofits are Worthless. And anything that isn’t a couple of grand is usually cheepchinesecrapola. Signature Hardware isn’t even legal to be sold in the US.

    All most people really need is a good brand like Delta, with a separate actually plumber in switchable hand shower. 1K ish for all of the parts and pieces from a decent plumbing supply.

  • 8 years ago

    Thanks Sophie ! They aren’t retrofits but will require installation after breaking the tile down. Just worries me. Is there a brand you d recommend ? Something similar to [https://www.houzz.com/products/vigo-shower-massage-panel-with-digital-thermometer-prvw-vr~40159364?lid=30145267[(https://www.houzz.com/products/vigo-shower-massage-panel-with-digital-thermometer-prvw-vr~40159364?lid=30145267)

  • 8 years ago
    last modified: 8 years ago

    Another cheepchinesecrapola. Most will be. Panels usually are. The right way to do this is with a domestic brand like Kohler or Delta. Individually chosen hard plumbed components are installed with a thermostatic valve that switches between elements. BTW, Most people never us the body sprays beyond the second week.

  • 8 years ago
    last modified: 8 years ago

    I can only tell you that my mother completely re-did her bathroom, total gut, and installed the side sprays and body jets. The shower area can fit 3 people I think (she lives alone). I believe all Hansgrohe fixtures. After the initial excitement of them, she now never uses the side sprays. The side sprays look cool, but actually aren't that enjoyable. She believes they were a waste of money though may be good for re-sale. And the final kicker is that she ended up replacing the fancy showerhead because she didn't like the spray pattern, the coverage or the pressure. She replaced it with the Speakman S-2251 (I know because I ordered it for her). Not a fancy showerhead, cost about 1/4 what the designer showerhead cost, but she loves it. Her plumber thought it was great too. So make sure you really want that stuff before going to all the trouble you will need to for it.

  • PRO
    8 years ago

    From what I can see Signiture Hardware is still in business in the U.S

  • 8 years ago
    last modified: 8 years ago

    Starcraft Builders has a webpage that lists origin countries of faucet brands. I'll link it though it's hard to read on a phone if you are on your phone. They say Signature is Taiwan and China. Starcraft also gives a warranty score for each brand. Just cause a brand is made in China not Germany doesn't mean it doesn't make good products or offer good warranty service. For example, some of Moen's faucets are made in China, but Moen still gets 5 stars for warranty service. Unfortunately though, Signature just gets 1 star on that.

    Starcraft Builders Faucet Reviews

    Starcraft Builders Review of Signature Hardware Faucets

  • 8 years ago

    Jay J

    I do these all the time. the most IMPORTANT thing to remember about purchasing a brand of faucet equipment is... CAN I GET REPLACEMENT PARTS LOCALLY?

    All the euro stuff looks wonderful, however if a stem valve needs replacing because it began leaking, then your replacement, IF AVAILABLE, at all, is three weeks away.

    Try different plumbing supply houses. Ask for their Moen, Kohler, Symmons, Delta, catalogs. The big 4 in America, & stocked in most supply houses. Don't be afraid to ask at the parts counter, as well as the show room. Step up and ask away. It's their job to serve you

    Any questions, jjjomo@msn.com

    Jay J thanked jjjomo
  • 8 years ago

    thanks so much, i will ask, but i couldnt find a panel from any of the reputed ones, would you have any suggestions, the in wall valve systems are all over 1500..

    my budget is around 700

  • 8 years ago

    Give up the panel idea. Do a nice Delta handheld on a bracket for it all and call it good. Or up your budget and add a plain shower head to the hand held. It does no good to have shiny shiny cool cool cheepchinesecrapola gawdawful quality that floods your house. Prettybis as pretty does.

    Stick with tried and true that your plumber can actually find parts for and repair.

    Jay J thanked User