Software
Houzz Logo Print
raee_gw

How to remove carpet adhesive

In my basement, there is old linoleum like tile glued to the floor; then there was also on top of that, glued down indoor-outdoor carpet. When the basement developed water issues, that carpet was pulled out. The water issue was resolved with new drains and a sump pump. The tile seems to be still well adhered and in good shape except for the remnant of carpet glue on them. I'd like to lay some new vinyl for easy cleaning and more attractive appearance.

I need to remove the remaining glue from the carpet installation (also from the wooden stairs that has the same carpet, not yet removed).

What can I use that 1) won't damage the tile -- at least, not the adherence to the underlying concrete 2) can be used in a basement space that doesn't have windows that open

Would sanding do the job? Or a chemical remover? Would Citristrip work?

Comments (8)

  • 8 years ago

    Help!

  • 8 years ago

    I used crud cutter and scrubbed like crazy and still had residue. A construction worker I knew used 50% bleach and it cleaned off easily. Another construction guy I know suggested cleaning it off with gasoline. Don't know how to get past the fumes, but the carpet glue that was used in my house was tough.

  • 8 years ago

    No gasoline!

  • 8 years ago

    I wouldn't dream of using gasoline! I'm worried enough about the fumes from adhesive remover -- which is why I was looking for something milder that could still do the job... I wonder why bleach would work, that makes no sense.

    I found out the hard way that cat urine would remove old adhesive -- when we removed the original linoleum from our 1941 kitchen, our elderly feline was quite upset by the construction and started using the exposed subfloor instead of the litter box. Every spot she went, the remaining old adhesive came up easily. However, there are distinct disadvantages to that method!!!

    Hmm, maybe I should try cleaning ammonia? but, again, fumes...

  • 8 years ago

    Photos of those tiles and the type of adhesive you are talking about. It is very possible this is a "sit on your butt for dozens of hours while scraping with a putty knife" type job.

    raee_gw zone 5b-6a Ohio thanked SJ McCarthy
  • 8 years ago
    last modified: 8 years ago

    Try the slicing method I suggested and then follow up with an environmentally *safe* (a relative term) adhesive remover. You may have to experiment with different solvents until you find one that will work. Perhaps research the internet for carpet adhesive remover suggestions and reviews. Slicing most of it off will make the rest of the work easier.

    It is a lot of work removing adhesive residues. Because your site has minimal ventilation, you will have to find a remover that you can safely use in that space.

    raee_gw zone 5b-6a Ohio thanked glennsfc
  • 8 years ago
    last modified: 8 years ago

    I'll suggest Citrasolv. I purchased it from Whole Foods, but you can order it online. I believe there is a "where to buy" feature on their website to tell you where you can buy it locally. It works great at removing adhesives (I cleaned the adhesive off an entire room with it). It smells good (it's made from orange peels) and no fumes. I used full strength with a scrub brush, then went over the whole floor with a diluted solution, then mopped with clean water.

    See Citrasolv.