Software
Houzz Logo Print
dwataha

'Testing' Dekton - our experience

8 years ago
last modified: 8 years ago

There seem to be stories about Dekton cracking or chipping, and also an old consumer test referring to that. But after seeing Dekton being used for years in Europe we wanted it for our kitchen remodel. Unfortunately for us, our contractor's choice of fabricators was off and they botched the job. The fabricator claimed to be 'certified' but after the bad workmanship we looked into it and we couldn't find them in Cosentino's database.

So, our work crew is removing it today. It's on our countertop, our 2-sided waterfall and an enclosed bar/eating area. The fabricator's account manager came out to look at the installation and spent and hour blaming the product. She claimed that 'if you look at the product it cracks' and that 'every join where two mitered edges meet are weak and chippy' with Dekton.

Since we were removing it anyway we were curious and we tested this ourselves today. We took our own hammer to it - we slammed the surface, the corners and the edges. Only after the workmen removed a vertical waterfall panel and exposed a single mitered edge could we get it to crack under a heavy swing of the hammer. No cracks or chips on all the other surfaces, edges and corners where two mitered edges met. Our experience was exactly opposite to what the fabricator had said. Also, as the workmen are removing it, it's coming off in big pieces. It's not shattering.

Not a science-based test by any means but we think it speaks volumes to the strength of the product and in our case confirmed the mistakes that the fabricator made before and during the installation.

Honestly, we can't think of a single thing you'd ever do in your kitchen that would create a crack or chip with this product.

With much disappointment, we'll have to go with another product because we can't find a credible fabricator in our area despite working from a list of those that have been certified by Cosentino. But anyway, props where props are due, Dekton FTW!

Comment (1)