Hi Jessica,

Adding LED back lighting is very simple to do and cost effective. To create the look below simply mount the STACT panels directly onto a plywood board, off-set from the back wall by either 2x4” or 1x2” boards (attached to the studs) and run LED strip / rope lighting behind the perimeter. Be sure to have the wiring put in for the lighting prior to installing the set up. ;)

Note: rope lighting was used below, however if you’re looking for the light to be perfectly linear with sharp edges at each corner it would be worth the few $’s extra to opt for LED strip lighting. Philips Hue lights would also be a cool option, as it would also you to control the lights with your smart phone.. allowing you to adjust the brightness and color as well.

For more inspiration please feel free to check out www.getSTACT.com/winecellars

Hope that helps!

Jess