Software
Houzz Logo Print
khalil_kandah

Is this normal for a tile backsplash?

8 years ago
My tile person just finished the installation of our glass tiles. Noticed some tiles are higher than the others and grout lines are not as uniform as I would like.

Can some of these tiles be removed and reinstalled better? Is it normal for some tiles to not be flush with each other?

Hopefully these pictures will show what I mean. Thanks!

Comments (10)

  • 8 years ago

    Take a pic of the overall backsplash but I agree with Jannicone.

  • 8 years ago
    I will post more pictures later tonight when I get home. Thanks
  • 8 years ago
    last modified: 8 years ago

    “Can some of these tiles be removed and reinstalled better? Is it normal for some tiles to not be flush with each other?”

    Machine made glass tiles should be flush if installation is done properly. It looks to me like your installer may not have prepped the wall properly, did not use spacers, and that he tried to install the tile with a smaller than recommended grout line. You are lucky it looks as good as it does. Removing individual glass tiles is not really an option when the spacing is off. If you can live with it, you should. If you can’t, you may have to discuss a complete re-do. Look at the installation specs and measure your grout thickness before having this conversation, though.

  • 8 years ago

    Like eam, my immediate thought was that he failed to use spacers so I was surprised to see it described as a great installation. IMO, if he didn't use spacers and relied on eyeballing it, that's very poor workmanship and I would ask for a do-over. You can't blame the wonkiness on the tile because glass should be uniform.

  • 8 years ago
    Here are a few more closeups of this work. Looks hazy as we still haven’t cleaned the grout film off the tiles yet
  • 8 years ago
    I am hoping to at lease be able to redo the poorly cut edges and redo those. My wife is very upset at this poor workmanship. I am hoping when we clean it up it won’t look bad. At least we selected a light color. My backsplash isn’t the focus of the kitchen.

    The rest of our kitchen looks great. I will post complete photos of the kitchen after the Easter holiday
  • 8 years ago

    That would be unacceptable to me for the reasons stated above, plus, look at how the area around the receptacles were done. Are your switch plates even going to cover that? The caulking is terrible (And I don’t think the inside corner was even caulked.) And why are YOU responsible for removing the grout haze? Now that is just ridiculous.

  • 8 years ago
    The plug cover will cover that poorly done part around the receptacle. I checked already
  • 8 years ago
    last modified: 8 years ago

    Oh, gosh. Your installer did not use a diamond blade to cut the tiles. Those blades are very expensive, and you cannot install glass tile properly without one.

    In my opinion, this job is a tear out. Do not remove the tile yourself. Pay the guy if you must, to pull it out and/or replace the drywall behind. He is more useful in demolition than in installation. Live without a backsplash for a bit if you must, but take care of this part now. Remember when I said live with it if you can? I’m changing that to clean it up and take a break.