Software
Houzz Logo Print
schmede

Advice: A large capacity washer with a heater

8 years ago
last modified: 8 years ago

Is it possible in the US to get a large capacity washer with a heater. A real heater and not just a booster. I want water that gets at least 160.

And I want a capacity that can wash a king sized comforter.

I currently have a spead queen top load. I don‘t like it because 1. It is too aggressive on clothing 2. No heater 3. The capacity is not large enough for my needs.

Any advice is really appreciated. Thanks!

Comments (10)

  • 8 years ago

    I don't think any American washers reach 160.

    I know the sanitize reaches 156.

    You'd have to opt for a European washer but there sizes are not as big as the US models.

  • 8 years ago

    The only one I think is the is asko logic line at 2.8 cubic feet , has a heater and It’s the biggest . But does anyone have experience with the washer . I know there was a thread of ones person review .

  • 8 years ago

    schmede, we get hot water to our SQs by turning the hot water heater up. At work, the heater is right next to the machines and we get the water to be over 165F after it is filled and agitated. At home, it is a longer run so I run water in the bathroom next to the laundry room until it is hot, then fill the machine. That used to be 130F but my son just put a new hot water heater in and it is hotter. I need to measure and see what it is now.

  • 8 years ago

    Wekick your Queens are top loaders. .arnt they? Much much more water.

  • 8 years ago

    Check LG. DD as a big one with a heater.


  • 8 years ago

    Mamap, the OP has a TL. This is just what I do to get a hot wash. To wash a king comforter, I fit it in and add detergent. It agitates some, at least enough to soak and work the detergent through. After it soaks, I spin it out and take it to the laundromat and put it through his FL. I have always done this because I never felt any machine was big enough to really move it around enough to clean it all the way. I have had much bigger machines in the past. You have to know the guy at the laundromat to get to use his big machines. We have extremely sensitive skin so it has to get a good rinse.

    As an aside, I was reading an article the other day that much of cleaning happens in the rinse. Clean water creates a gradient with the detergent that pulls dirt out of the pores(for lack of a better word) of the fabric. It is much more effective than two back to back detergent fills.


  • 8 years ago

    The LG has a big capacity. I talked to their customer service and the hottest temp the heater will do is 147. I think I can get my speedqueen that hot if I turn up the water heater.


    Why don‘t the US machines get super hot? No demand?


    I could buy some used bosch nexxt machines which I think are full sized machines but I don’t know if that’s a good route either.

  • 8 years ago

    And 152 is plenty hot. Actually 140 is plenty hot. Modern day textiles can't take the heat like old textiles could.

    Washing in super hot water is aggressive. I'm talking 140+ F. If your washing in high temps you need to be sure the garment can handle it and I'd also use a less aggressive detergent. I like the heat but my sheets are old and can withstand the extensive heat.

    Besides dont you know cold is the new bestest temp? Haha

    Seriously I truely think a good hot temp of about 140 F is hot enough to keep your sheets white and free of soils. Unless your dealing with some exotic deadly bacteria of course.

  • 8 years ago

    Of course everything I said above has nothing to do with the OP's question. Haha