Software
Houzz Logo Print
nehome

2 Double Hung Windows - Factory Mulled Appearance?

8 years ago

What is the difference in appearance of factory mulled vs windows installed separately in the field (not sure of the term/installation option for not factory mulled)? Using Andersen Woodright windows.
I'm assuming the width of the center trim is reduced but does factory mulled reduce the window/glass width vs the stated window width options for a single double hung?


I am replacing 2 windows as part of a kitchen renovation (new construction since being relocated) - one window above the sink w/43" opening, second is 2 double hung windows in a 68" opening.


Sink window - I prefer 2 double hung rather than casement to avoid the screen on the inside. Initially we discussed using 2 @ 21 5/8" but that would have required reducing cabinetry on either side and contractor was concerned about the wide trim in the center obstructing the view. I believe the solution was to have the windows "factory mulled" to reduce the width of the trim between the windows. The specs for this order state Unit Size at 43 3/8". How is that possible if the windows are 21 5/8"? Does Anderson offer narrower windows when factory mulled? I want to be certain the glass portion has not been sized down.


The second window being replaced is a larger window and we initially discussed 2 @ 31 5/8. The order specs state unit size 67 3/8" so either the windows have been sized up to the 33 5/8" or they won't be factory mulled? The picture below is my current window. Based on the trim in between is this factory mulled? I'm OK, and prefer, a narrower center trim for the window above the sink but if the aesthetics of factory mulled will impact this larger window, I want to be sure to communicate that to my contractor.


Hope my questions make sense!



Comments (3)