Software
Houzz Logo Print
wynnko

Adapting 8” spread bathroom sink?

8 years ago
Could you take a sink top made for an 8” spread faucet and use a 1-handle faucet in the center and soap dispensers in the other wholes?

Comments (14)

  • 8 years ago

    You make the best of what you have to work with. If you already have a sinktop made for an 8” spread faucet, and already have a 1-handle faucet, then putting in a soap dispenser in one hole and a hand lotion dispenser in the other hole could be a solution.

  • 8 years ago

    Yes. Or put an under-sink water filter spout in one. Definitely a soap dispenser.

  • PRO
    8 years ago

    Measure first! Not sure if the hole size is big enough for the soap dispensers..

  • 8 years ago
    Thanks for the responses! Any ideas on how to make one opening a toothbrush holder?
  • 8 years ago

    So this is a bathroom sink? If it is, I would just buy a new sink. New ones start at around only $30 and go up from there.

  • PRO
    8 years ago

    The bigger question would be are we dealing with a top mount sink or holes cut in marble? Post a picture....

  • 8 years ago
    We’re adding a new bathroom and I plan to buy a sink to attach to a vanity base. I can choose whether the sink has 1 hole or 3. I prefer a single handle faucet. I love the idea of additional storage if I was to go with the 3 hole and convert to other uses. Let me know any additional thoughts now that you have more information.
  • 8 years ago

    I have seen covers for the extra holes - white porcelain or stainless, but not a toothbrush holder. I suppose if you have a lathe you could make one. Maybe use a small gasket around the end on the underside of the sink to hold it in place, and either treat it with Waterlox or epoxy paint the heck out of it to make it water resistant. I would design it with a bit of a glass or plastic bobeche on the top, to catch the drips.


    I would challenge you to think about the dirty splashes that a toothbrush would get so close to the faucet, and whether you would want them on your toothbrush. Heck, when my hubby flosses, anything nearby is at risk! I keep my brush in my new medicine cabinet.

  • 8 years ago

    I think the idea is there, but not meant for that, so it might look wonky...


    Get the 1 hole sink vanity, then display a beautiful soap bottle and cup with toothbrush off to the side....

  • 8 years ago
    Optimally, you should store your toothbrush under the sink unless your toilet is enclosed or far from the vanity.
  • 8 years ago

    Bathroom sinks are usually 3-hole, even for single handle faucets. Which would be 4-inch spacing. There are kitchen faucets that use single holes, and maybe bar faucets.

  • 8 years ago
    last modified: 8 years ago

    No, there are plenty of one-hole bath faucets now, too. I have one.

    And a one-hole sink, too.

  • PRO
    8 years ago
    last modified: 8 years ago

    Get the right top, and use the right faucet please??? Why make a kludge mess if you need not do that. There are great looking 8 inch and single faucets. There are great liquid soap containers too. Pedestal or counter top/ with sink.......marry up the approriate components please.