Software
Houzz Logo Print
ps6fsu_de_z7

HVAC advice please. Is this correct?

7 years ago

I am in the process of remodeling a room to convert it to a den/office. I am getting hardwood installed next week so I ripped up the old vinyl flooring last night and had to take the old baseboard air registers off to get underneath when I discovered what looks like a really inefficient way to heat a room. The room in question used to be the back room in the house until the previous owners added a sunroom on to the back of it. It appears that the contractor doing the HVAC work used the same ductwork for the den to heat the sunroom. So, there are 2 very large (like 8"ish) lines coming from the plenum towards the back of the house with 2 floor registers in the den. These same lines continue on into the sunroom where two floor registers are. There is very little heat coming out of the floor vents in the sunroom. It is much colder than the rest of the house. On top of this, the first two registers in the den look like two huge holes in the floor that had old baseboard registers so heat is pouring into the den. It is very warm compared to the rest of the house. Any thoughts on what to do? I obviously don't do this for a living but in my instict is to cut back the subfloor and try to remove/seal the 2 in the den so the sunroom gets more airflow. Then just run a new line to a new register in the floor of the den. My basement is unfinished so I have easy access. The problem is that the hardwood is being installed next week and I have a full time job so I am up against the clock.

Comments (3)