Software
Houzz Logo Print
nick_fischer83

Leveling Floor for Locking Plank

7 years ago

Hello,

I am in the process of remodeling a living room and I am trying to figure out the best way to prep an unlevel floor for either vinyl or laminate locking planks. the lowest point on the floor is 1.5" lower than the highest point. I used a laser level to map out the depth every 4 feet and have attached a map of the floor. Half of the room is fairly level and then the floor slopes away after the halfway point. Underneath this floor is a crawlspace, and there is a wall splitting the crawlspace which accounts for the change in slope.

I am looking for the most economical solution to create a surface that I can install the locking planks on top of not necessarily eliminate the slope entirely. What options do I have?

Thank you,
Nick


Comments (2)