Software
Houzz Logo Print
kelly_feil

Reviving an Old Pergola

7 years ago

We have a huge wood pergola that is very tall and peaked and a nightmare to work on. It was stained white and then restained white a few years ago. My husband has scrubbed, pressure washed, etc. but there are still some darkened areas that look like old mildew stains and a few places where stain has flaked off to bare wood. What's the best/easiest/longest lasting product to cover the flaws? Ideally, we would like to take this dark now to match our deck and minimize the appearance of dirt. Should we use a solid stain or paint? Is there a product with primer in it, one coat products, etc? Suggestions?

Comments (5)

  • 7 years ago

    Pictures? Type of wood?

  • 7 years ago

    Probably some type of pressure treated wood. Here are pictures - and this is despite cleaning the thing! We just want to make it presentable to get us through another couple of years without totally renovating our pool/patio area. We also have lots of plantings and a pool right by this area..



  • PRO
    7 years ago
    last modified: 7 years ago


    BEFORE: Notice that the Pergola was never painted before.

    AFTER

    You might want to use a bleach mixture first to kill the mildew. Use a 1/10 mixture of bleach to water. Place in a spray bottle and let it sit for 5 minutes after application. Wet it again and scrub it with a deck brush.. Rinse, let it dry for 48 hours and then prep/stain. A pressure washer helps but is not necessary.

    Use an oil/acrylic solid color deck stain often called a hybrid stain. Use a palm sander with 80 grit sandpaper and give it a good sand first. Buy or rent a 6' bakers scaffold. That'll make the job 10X easier than using a ladder. Those scaffolds are easy to erect.

    That looks like pressure treated pine.




    Kelly Feil thanked Eco Star Painting
  • 7 years ago

    Thanks, Ecostar. That's a great idea on the scaffold. I guess we can try the bleach next. The sad thing is, those pictures are AFTER using Oxyclean/detergent, pressure washer, and scrubbing. I was hoping to avoid sanding, but maybe we cannot. The previous stain was solid. Do you think we will be able to go over the white with a new dark color readily or is that going to make matters worse? Are we likely to need more than one coat? Primer? The original job was primer plus two coats - but we were younger then! While I love the white, stains are just so much more visible on it.

  • PRO
    7 years ago
    last modified: 7 years ago

    If it was previously primed & painted just apply 2 coats of Benjamin Moore Aura exterior paint. (flat) or Sherwin Williams Duration. Any darker color will work just fine. I like to use stains on decks & fences but you're stuck with using paint because it was primed originally. Try not to sand down to the bare wood. Spot prime if you do punch through.

    Paint the length of a board one at a time or it might look uneven.

Sponsored
River Mill Construction
Average rating: 5 out of 5 stars2 Reviews
Delaware County's Customer Focused General Contractor