Software
Houzz Logo Print
fellerb79

windows for Chicago contemporary new construction

7 years ago
last modified: 7 years ago

I am trying to pick windows for a contemporary new construction in Chicago. I have gotten a quote from Panda (thermally broken aluminum) and Zola (uPVC quote so far, they said moving up to their ThermoClad line would roughly double the price), and will be getting pricing on Marvin (Modern line I guess? Do they offer other lines that have narrow frames?). Included in the schedule is a fairly large glass door (not sure if bifold, multislide or lift and slide) of 125" wide by 116" tall, with a fixed window next to it of 83x116, which seems to be about 20% of the total project cost. All of the other windows are either fixed, awning or tilt and turn. Are there other brands I should consider? From the estimated price jump to their higher end line, Zola will be maybe 10% more than Panda, which was already a bigger number than I was hoping for.

Comments (19)

  • PRO
    7 years ago

    Wouldn't use aluminum, even thermally broken, in Chicago. Look at one of the fiberglass units or one of the more Euro PVC designs.

  • 7 years ago

    Zola is a good product, Marvin Modern is supposed to a very good window from a solid manufacturer. I would cross Panda off any list that gets anything other than warm temps year round.

  • 7 years ago

    is that because of the manufacturer, or because its all aluminum? I would be better off with the zola pvc than with the zola aluminum even though its 1/2 the cost? and marvin modern is fiberglass clad aluminum, does that mean i shouldn't use that?

  • 7 years ago
    last modified: 7 years ago

    Every all aluminum even thermally broken is a poor choice as it is a very good conductor of cold. It will be cold at the interior and sweat. An aluminum clad wood or fiberglass window will not have these issues.

  • PRO
    7 years ago

    What are the U-values of the zola aluminum window? What is the condensation reistNce number? Very hard to decipher from there website.

  • 7 years ago

    So does that mean marvin doesn't have a thin profile product that I can work with since their "modern" line is fiberglass clad aluminum? What about jeldwen siteline or andersen architectural series?

  • 7 years ago

    panda sent me some NFRC test results but i don't know how to read them....it gives 60 different rows of u factors and CR values. I have reached out to zola asking for that info from them

  • 7 years ago

    No I said "ALL" aluminum. Modern Marvin is a fiberglass clad aluminum which is ok. Jeldwen is a poor choice of windows regardless of series.

  • 7 years ago

    here are the panda results for fixed windows....i don't know how to read them. They seem to have done the windows on some very big high rises and other large commercial projects in Chicago- is there a reason that aluminum is fine for those and not a single family?

  • 7 years ago

    u value for both thermoclad as well as all aluminum from zola is .14 and CR is 77

  • PRO
    7 years ago

    Did they confirm that as a glass U-value or total unit?

  • 7 years ago

    Panda can give you all the test data under the sun. The fact remains, I have sold the product and the quality is lacking and customer service just north of non-existent.

  • 7 years ago

    is the choice between the various materials offered by zola for instance essentially aesthetic? pvc vs aluminum clad wood vs pvc clad aluminum or is one inherently a better material?

  • 7 years ago

    from zola:
    That U Value is the whole unit. The triple pane IGU is 0.09 for the u Value

  • 7 years ago

    Is this a function of the quality of residential aluminum windows over the commercial manufacturers? Large commercial, residential and hotel projects in Chicago use almost exclusively thermally broken aluminum windows. I am speaking of traditional punched opening versus window-wall or curtainwall (which are also aluminum). We do primarily restoration projects, so we are usually looking for double-hung type installations, but favored manufacturers for those include Traco (Kawneer) and Graham. Sweating has not been an issue.

  • 6 years ago

    Just curious what window company you ended up going with


  • 6 years ago

    Ended up deciding between oknoplast and marvin, and going with oknoplast to meet budget

  • PRO
    4 years ago
    last modified: 4 years ago

    Awesome choice! We sell Oknoplast windows and doors exclusively in our showroom in western NC. It's an incredible UPVC product with a great variety of styles and colors to choose from. They're highly energy efficient, secure, no maintenance, affordable and strikingly beautiful.

    This is a current project we have here in the mountains.

    Laurel Windows

    Brevard.NC