Software
Houzz Logo Print
endra_shorts

Really tall snake plant

7 years ago

Is it a good idea to cut the tops off a snake plant that is very tall?

Comments (28)

  • 7 years ago

    Why would you do that?

  • 7 years ago

    Well it is kinda too tall for the pot its in. It is leaning here and there and I don't have any taller pots to put it in.

  • 7 years ago

    Put it in a bigger pot.

  • 7 years ago

    Are you sure it is leaning only because of size of pot? There could be other reasons...why don't you post a photo, maybe we can give you some other tips. But cutting swords shorter is not the a very good idea.

    Lucy Shorts thanked rina_Ontario,Canada 5a
  • 7 years ago

    Do you think its okay to bury some of the stem along with the roots?




  • 7 years ago

    You could just tie a ribbon around them to keep them in place

  • 7 years ago
    last modified: 7 years ago

    Sorry, but no, if you bury the stem along w/ the roots, it's likely to rot; bad practice, I wouldn't do it.

    Thx for pix, but pls try to rotate them, I can't turn my head far enough to see this right. Where are your plants' roots?

    Rina & I were thinking the same thing, it could be wobbly in the pot due to unstable or rotted roots.

    Sorry but that pot has no relation to the plants & the size pot they need. This one's too big.

    If possible, pls take a pic w/ the plants in your hand holding the camera such way that you show the entire length of the leaves.

    They can be tall, but if rooted well, they stay stable. I have used rocks at the base to prop them up long enough to take root, but that's OK.

    Lucy Shorts thanked Karen S. (7b, NYC)
  • 7 years ago
    last modified: 7 years ago

    ...agree with all Karen said...

    In the 2nd photo, I can see that most do not have any roots, and couple seems to have some but very little for the plants. There is the problem: nothing to keep plant stable in the potting mix.

    Here is photo of different sans - it is only about 7" tall or so. Look at the roots - this is when I was repotting, and actually trimmed off some roots:


    I do not know why the roots were lost, but suspect they rotted away. That happens easily if plant is in constantly moist soil. You need to get a well draining mix, and re-root them. The pot they are laying on is on a big side - I would use smaller one. It could be used, but make sure it has sufficient drainage hole, and mix is very well draining.

  • 7 years ago
    last modified: 7 years ago

    Ohh thank you. Good questions. I don't know why the pictures are turned that way and the roots are very small. I am going to repot all of these. Some have no roots. Can I put all of them in soil? Even the ones with no roots?






  • 7 years ago

    Yes, pot them. BUT make sure potting mix drains really well or there will be problem. What kind of soil are you using?


    Do not burry them deeper than white areas. You'll need some support. Using large rocks and/or sturdy sticks you can tie them to should help. For example, insert 4 (or more) sticks around perimeter of pot. Plants should be planted inside of them, than you can tie a string around the sticks to keep plants from falling on the side. Just an idea...These should be removed-not needed, once roots grow. I usually use large rocks, but your plants are tall, do not have roots and may need more than that:


    Are you planning on potting all into same pot? If my plants, I would put few with roots into separate pot from ones without any.

    Lucy Shorts thanked rina_Ontario,Canada 5a
  • 7 years ago

    I plan on planting one or two in separate pots to have more and want to give one to my grandmother. I use a cactus mix with some bonsai jack grit.

  • 7 years ago

    I think Rina & I would prob agree to use 50% Perlite or Pumice mixed in to your 'Cactus mix' as a good, almost no fail mix for these.

    It'll be dicey watering 'til they get established. After repotting, don't water 'em for several days at least, that is the ones w/out roots. Don't know how you water, but if w/ a heavy hand, I'd use terra cotta pots for these.

    For your plans w/out roots, I'd sprinkle their bottoms w/ CInnamon, then shake it off when planting dry. This will help hold off rot 'til the plants get re-established. Cinnamon is a natural anti-fungal & can help while getting these plants re-rooted.

    Thx for the additional, better pix, it really helps us to see how to try & help you & we all learn more in the process, right Rina? (lovely Moonshine you've shown there.)

    See, here's what I meant in a pic showing the whole length of leaves w/ roots.

    I'd used these to propagate some leaves & I've left the resultant plants in my office. I brought these home 'cause they looked a bit scruffier than I wanted in the office plant & will use them here to prop more plants.

    Lucy Shorts thanked Karen S. (7b, NYC)
  • 7 years ago

    I have changed my mix not to pure compost. But got to watch the watering. Sans need very little water like cactus. Make sure whatever pot you use has drainage holes. Closest mix on market to use is pure Miracle Grow for cactus. I don't mix with perlite anymore. Some do and it works for them.

    For support I use tomato cages but sticks and stones around the base will work well.

    Your post should have been on the sanseveria forum. Good luck and your plants don't look too bad. They will produce roots in no time and next year you will see a big difference.

    Lucy Shorts thanked Stush2049 Pitts. PA, zone 6
  • 7 years ago

    Thank you all for the advice. I am still learning and can't do it on my own. There are only so many books a person can learn from. We all need each other to do the best we can for our wonderful plants.

  • 7 years ago

    Personally I would root that sans on 100% pumice, not sure if perlite could be substitited. And do use a small pot. Water will run right through the pumice, holding a little, and it forms a great medium for rooting.

    Lucy Shorts thanked Rob Blomquist
  • 7 years ago

    What is pumice exactly sounds like .

  • 7 years ago
    last modified: 7 years ago

    Here is a link that might be useful: https://www.generalpumiceproducts.com/horticulture

    This company has a good product but you may be able to find pumice at your local garden center.

    Lucy Shorts thanked SoCal Stewart (San Diego, Ca Zone 10A/10B)
  • 7 years ago

    In my area pumice is expensive due to shipping weight. It is better no doubt but perlite should do the same job.

    Lucy Shorts thanked Stush2049 Pitts. PA, zone 6
  • 7 years ago

    Perlite will just float to the top, nullifying it's purpose. Poultry grit is a good substitute

  • 7 years ago

    No Manuel, I have never experienced that & frankly I don't believe it since I've used it for many yrs. w/ no problem like that at all.

  • 7 years ago
    last modified: 7 years ago

    Stush

    Great idea to use tomatoe cage as support - much neater than tying a string around the stics...:)

    Karen

    Agree - I would add sifted perlte or pumice to C&S soil in 1:1 ratio. I use grit and perlite (1:1 ) and do not have problem with floating. I use gravel top-dressing and perhaps that may help with it. Mix drains very well. I can't get pumice easily (and relatively inexpensive), and perlite is great substitute.

    Lucy Shorts thanked rina_Ontario,Canada 5a
  • 7 years ago

    Perlite does float on water but shouldn't have that much water for sans. Top dressing helps to hold it in place and well mixed helps but always get some at the surface to float. Heavy grit doesn't have that problem. I used to use grit and prelite to my mix and some plants I still do but switched to almost pure compost from my own pile. To each their own. It mostly depends on how you take care of and where the plants grow at that will make the difference in potting mix.

    Lucy Shorts thanked Stush2049 Pitts. PA, zone 6
  • 7 years ago

    That's right. I didn't think about that. I am in CA inland empire. We should be using the type of medium that the plants can thrive in and what matches our time zones.

  • 7 years ago

    If you need top dressing to hold the perlite in place, then it's useless. It's supposed to be mixed throughout the soil to keep it from compacting.

  • 7 years ago

    Manuel, Yes but there's always some at the surface that floats around some. To me that's only temp. till it all setters in. I hardly use it any more.

  • 7 years ago

    For a while I used a mix that was about 1/3 grit, 1/3 perlite, and 1/3 potting soil without a top dressing. Mostly that worked OK. Yes, some perlite settled on the top but most of it stays mixed. Though, the perlite settled on the top is easy to blow away. I'm not sure my mix will work well for snake plants. I haven't had good luck growing them. Or, could be it would work OK if I just watered them more often. I'm not sure.

    Lucy Shorts thanked Polypompholyx
  • 7 years ago

    On snake plants, temps make all the difference. Remember this; Cold + Water = Death (rot) and when temps go high like in the 80's and 90's, can give them all the water they can. Summer is when my plants really take off out side then come winter and I put them in a lighted cellar they go dormant and I water them almost none at all.

    Lucy Shorts thanked Stush2049 Pitts. PA, zone 6
Sponsored
Daniel Home
Average rating: 4.8 out of 5 stars20 Reviews
Premier Interior Design Team Transforming Spaces in Franklin Co, Ohio