Software
Houzz Logo Print
pjsbconroy

Shower tile issue

7 years ago

Seeking Expert advice


seems to be an issue with our shower floor tile or the adhesive on the tile

either way, the tile Will need to be pulled up.


should I be prepared to replace the wall tile due to damage when floor tile is removed?


what is a reasonable remedy to replace the floor tiles?


photos show what appears to be moisture under the tiles

just cleaned and it looks dirty.


need some fixing advice.

Thank you.





Comments (15)

  • 7 years ago
    last modified: 7 years ago

    There isn’t leaking water (walls, floor)

  • 7 years ago
    last modified: 7 years ago

    What have you been cleaning that with? A “bathroom” cleaner?

  • 7 years ago

    Do you mean there’s water trapped under the tiles?

  • 7 years ago

    Tried gentle cleaners but didn’t remove soap so used a bathroom tub/tile cleaner.

    looked the same before heavier product was used.

    the tile is glass (not marble)


    don’t know if there is water under the tile. Folks at the tile store think so.


    question presented was how to remedy and expectation about replacing wall tiles As well as floor.

    hoping it’s not a total loss.

    never partially repaired tile work.


    any tile experts?

  • 7 years ago

    Your not replacing tile. That is a complete gut and start over unfortunately, floor and walls as the entire waterproofing system ties in together.

  • 7 years ago

    Not an expert but I didn’t think you were supposed to use glass tiles on a shower floor? Good Luck

  • 7 years ago

    I used Oceanside Glass tile in 2 of my bathrooms and I remember reading their spec sheets -- they said you could use glass tile on a shower floor, they just don't recommend larger sized tile due to the potential of it being quite slippery. Some glass tiles also have a matte finish that makes them less slick.

    P C thanked chispa
  • 7 years ago
    last modified: 7 years ago

    Twosit4me, I know Daltile makes a 1" hex glass carrara lookalike that's rated for shower floors with a DCOF greater than or equal to 0.42.


    ETA: The daltile carrara lookalike I'm thinking of from the Uptown series is glass but a matte finish.

    P C thanked adawn5
  • 7 years ago

    This is the same tile.

  • PRO
    7 years ago

    millworkman is correct in that it is in not the "tile" that presents the problem, and therefore you are not just replacing the "tile". A shower is built as a system. It's what is under the tile (and we have no idea which system was used, - several are acceptable and several are not) that secures the system. The pan liner will wrap up and over the curb and a minimum of 6" to 12" up the walls. Yes, the walls are part of the system to answer your question. You need a consultation with a professional tile contractor on site. Oh, and many glass tiles are rated for showers.

    P C thanked Dragonfly Tile & Stone Works, Inc.
  • 7 years ago

    Thank you. I‘ll anticipate a redo.

    4x5 to the ceiling tiled shower. Augh

    The install was a professional with many years under his belt.

    What a shame. Ironically we were Just about to start another bathroom remodel. HAULT


  • 7 years ago

    Good to know about the glass tile. I had looked at some for my shower and it said not appropriate for water areas, I ASSumed wrong. Good luck to you.

  • PRO
    7 years ago

    Was he a "Tile Professional"? Or someone who "also" does tile? We see this problem too often. We are assuming you have discussed with him the methods he used and the problems now? Did he warranty the work? Sorry you are experiencing this.

  • 7 years ago

    very good questions which I don’t know the answers.

    waiting for his return to discuss.

    thank you for your insight.


Sponsored
J.Holderby - Renovations
Average rating: 5 out of 5 stars4 Reviews
Franklin County's Leading General Contractors - 2X Best of Houzz!