Software
Houzz Logo Print
heather_arnold54

How Do I Dull This Enamel Down?

6 years ago

My GC does whatever he wants and then refuses to change it. For instance: he asked me what color I wanted trim and then painted it semi gloss enamel. BC of the lengthy drying time, it has dried and looks nearly like reflective glass everywhere. I have never seen such shiny trim in my entire life. He is almost done with our house and I don’t want to pay him to fix it and honestly he is so grumpy I could just see him walking away with the job unfinished. So now I’m to the point where I will just fix it myself. How do I remove the gloss without removing the paint? I don’t want to repaint if possible. I just don’t understand why he would make them so glossy, he never asked and I assumed he would paint them with a normal finish like every other trim work I have seen in my life. You can see every single drip and brush mark.... Help!

Comments (14)

  • 6 years ago

    I am a realtor and I have never seen such a glassy finished trim in any house I have ever shown here. Everyone who has seen it thinks it looks awful, especially because of brush marks.

  • 6 years ago
    last modified: 6 years ago

    what paint/finish did he use? You prob have never noticed it because most trim work is white. I can assure you semi-gloss and glossy are what is used on trim work.


    take a photo from further back, not down on the floor.

  • PRO
    6 years ago

    I use oil high gloss on all my trim, and it doesn't even look that shiny. Trim should be painted in a semi-gloss.

  • 6 years ago
    last modified: 6 years ago

    Dulling that paint--in an entire house--is a fool's errand. Realistically, there is nothing you can do that won't take an enormous amount of time and still end up uneven. I'd be more upset about the textured finish on the walls (but my guess is you're out west where it's more common).

    Whatever you do--don't do it right now. That paint may be dry, but it's not cured. Leave it for a month or two. You could try--in an inconspicuous spot--the green scrubby pads, like the ones on sponges, but not them; get just the green pads from the paint department, they're made for that. And go slow and light; if you get it warm by friction, it will roll off in little balls, ruined. The question is--can you do it in the crevices and joints so that it looks even? My guess is no, so I'd leave it alone.

    I fairly like it (from the only photo you've posted). It looks like the old-fashioned oil-based paint. I'd love to know what he used.

  • 6 years ago
    <?xml version="1.0" encoding="UTF-8"?><md>He used an oil based enamel. The can said semi gloss. It’s cold here and he said longer drying time = glossier finish. I do live in the Midwest. We all have textured walls out here. Interesting how styles are so different across country!
  • 6 years ago

    Where did he get oil based semi gloss. You cant even buy oil based in my area. Trim is done in semi gloss though, regardless of whether oil based or latex enamel. However, the brush marks, shouldnt be showing up that much.

  • PRO
    6 years ago

    cat_ky - I live in CT and we can still buy quarts of oil based paint. I did however stockpile gallons when I heard it was being discontinued. Sadly, just used the last of it on my outside trim. It will be quarts from now on. I can still get Fine Paints of Europe oil as well.


  • 6 years ago

    You’ll be grateful for the gloss when it’s cleaning time!

  • 6 years ago

    It was purchased in Missouri. You can buy buckets of it here.

  • 6 years ago

    It’s done to industry standard. If you wanted something else, it should have been specified. Pay to have it repainted. Oil is legislated out of existence nationwide due to VOC issues. It isn’t missed. New coatings technological advances produce superior products.

  • 6 years ago

    Wait for the paint to completely dry and cure then apply a thin, even coat of poly in satin (or whatever sheen you like). No need to repaint and it will add another coat of protection.

  • 6 years ago

    Lucky you Design Girl. I looked all over for a quart of white, in my area, to do the outside of a door. I ended up having to use latex.

  • PRO
    6 years ago

    In Canada we have not had oil based for a long time already. I can’t understand why you did not specify the paint finish since the guy seems like an idiot to me. You need to be specific not just color but finish.I would have fired him the first time he did something you didn;t want I have had high gloss trim in a very contemporary house and loved it BTW