Software
Houzz Logo Print
daninthedirt

how to avoid flooding

6 years ago
last modified: 6 years ago

Very specific fix needed here. We have a converted garage, and the front wall that replaced the door is just regular framing, with a wood cover. That converted garage is at the base of a sloping driveway. As in, the driveway slopes down toward it. When it rains a lot, the water runs down, and seeps into the converted garage. Shop vac time!

I'd like to put a dam in front of that wall. Six inches height of brick would work well. The rest of the house is mostly brick, so I'd use the same kind of brick. It could look nice. No problem doing that. BUT, I am concerned that a low brick wall dam in front of and adjacent to a wood wall would allow rain water to get in behind it, basically making a long-lasting puddle up against the wood wall, eventually rotting it out. So ... the question is how to prevent that from happening. I guess I could fill the gap between the brick dam and the wall with spray-in foam gap filler. Or, I could load the gap up with mortar, though that could rot out the wood before it hardened. Or, I could top the brick with some tiling that butted up against the wall, and then seal the crack on top with a silicone bead.

Ideas?

Comments (2)