I would stay all the same size. So if you really want the larger pulls on the glass fronted cabs, use that size below.

But it doesn't look like the large size will work on the rest of your cabinets, and perhaps you should consider if it would be best to use the smaller size throughout.

I’m not sure where your determining that the large wouldn’t work .... as I believe large would work with all these pieces. There are areas like a coffee bar where smaller 6 1/2” will be used but that doesn’t show here... so I’m a bit confused by what you mean.

I was looking at the drawers by the fridge - but pictures don't always represent dimensions well so if that is not the case, just ignore my comment!

You’re right... my mistake, I didn’t even realize I had photographed those cabinets and yes, I was going to do the 6 1/2” pulls there.

Don't get hung up on same size, that's anal. Check the famous "one third" guideline for pull sizes.

@strategery What is the "one third" guideline?

I did check it but based on my measurements it wasn’t ‘quite a fit’ I already have smaller in other areas and am leaning towards the smaller on the drawers

I only see one picture?

Scroll... there are 3

Interesting houzz IT issue I think. When the prefix for the site is houzz, there is only one photo. If you replace the houzz with gardenweb.com/discussions etc then the 3 photos appear. KSD you are not crazy.

@salonva Lol! Thank you! I will try that. I want to see what she is talking about because I am picking out pulls and want to make sure they look right on some long drawers I am getting.